Attaching The Computer To A Mounting Fixture - HP EliteDesk 705 G3 Hardware Reference Manual

Attaching the computer to a mounting fixture

The computer can be attached to a wall, swing arm, or other mounting fixture.
NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket.
1. If the computer is on a stand, remove the computer from the stand and lay the computer down.
2. To attach the computer to a swing arm (sold separately), insert four screws through the holes on the
swing arm plate and into the mounting holes on the computer.
CAUTION:
third-party mounting solution to the computer, use the screws that are supplied with the solution. It is
important to verify that the manufacturer's mounting solution is compliant with the VESA standard and
is rated to support the weight of the computer. For best performance, it is important to use the power
cord and other cables provided with the computer.
To attach the computer to other mounting fixtures, follow the instructions included with the mounting
fixture to ensure that the computer is safely attached.
6 Chapter 2 Setup
This computer supports the VESA industry standard 100 mm mounting holes. To attach a