Advertisement
6. How to operate in an off-line mode.
1) Remove the Interface Top Guides, Disconnect the cable connected to the interface.
2) Change mode into an off-line mode and open the safety cover, then the tray will go down.
3) Unscrew the screws and remove the interface.
4) Load the paper onto the tray.
5) Adjust the tray Side Guide according to the width of the paper and fix the knob.
6) Check the Fold size setup on the upper/lower folding cassette.
7) Start your operation by run a few single sheet one at a time to make sure fold size are setup correctly.
7. How to remove paper-jam
(Refer to the manual 4-2)
1) Press the <stop/restart> button on the printer to stop printing.
2) Slide Printer away from the machine.
3) Open the cover of the feeding tray and remove the paper.
4) Press <start/stop> button of the sealer and return to "ready online" mode.
5) Close the cover and connect the printer.
6) Press the <stop/restart> button on the printer and start printing.
7) The jammed paper (already printed) still can be sealed by feeding it into the printer with non-
printing function.
8. Before using the unit
Please Jog your Forms (papers) before loading to the Printer Feed tray. Make sure printer is align with
pressure sealer machine. Print several single page for test run.
12
Advertisement
