Removable Towing Hook; Emergency Towing - Genesis G90 2018 Owner's Manual

Hide thumbs Also See for G90 2018:

Table of Contents

Removable Towing Hook

1. Open the tailgate, and remove the

towing hook from the tool case.

2. Remove the hole cover pressing

the lower part of the cover on the

front or rear bumper.

3. Install the towing hook by turning it

clockwise into the hole until it is

fully secured.

4. Remove the towing hook and

install the cover after use.

If towing is necessary, we recommend

you have it done by an authorized

retailer of Genesis Branded products

or a commercial tow truck service.

If towing service is not available in an

emergency, your vehicle may be

temporarily towed using a cable or

chain secured to the emergency tow-

ing hook at the front (or rear) of the

Use extreme caution when towing

the vehicle with a cable or chain. A

driver must be in the vehicle to steer

it and operate the brakes.

Towing in this manner may be done

only on hard-surfaced roads for a

short distance and at low speeds.

Also, the wheels, axles, power train,

steering and brakes must all be in

good condition.

Table of Contents