System Operation - Genesis G90 2018 Owner's Manual

Convenient features of your vehicle

System Operation

Ventilation
1. Select the Face Level
2. Set the air intake control to the
outside (fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
Heating
1. Select the Floor Level
2. Set the air intake control to the
outside (fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
5. If dehumidified heating is desired,
turn the air conditioning system on.
If the windshield fogs up, select the
Floor & Defrost
the Front Defrost
Operation Tips
• To keep dust or unpleasant fumes
from entering the car through the
ventilation system, temporarily set
the air intake control to the recircu-
lated air position. Return the con-
trol to the fresh air position when
the irritation has passed. This will
help keep the driver alert and com-
fortable.
• To prevent the inside of the wind-
shield from fogging, set the air
intake control to the fresh air posi-
tion and fan speed to the desired
position, turn on the air conditioning
system, and adjust the temperature
control to desired temperature.
3-134
Air conditioning
All Genesis Branded Vehicle Air
Conditioning Systems are filled with
mode.
environmentally
refrigerant.
1. Start the engine.
2. Push the air conditioning button.
3. Set the mode to the Face Level
4. Set the air intake control to the
mode.
5. Adjust the fan speed control and
When maximum cooling is desired,
set the temperature control to the
extreme left position then set the fan
speed control to the highest speed.
mode or press
mode.
When using the air conditioning
system, monitor the engine tem-
perature gauge closely while driv-
ing up hills or in heavy traffic
when outside temperatures are
high. Air conditioning system
operation can cause engine over-
heating. Continue to use the blow-
er fan, but turn the air condition-
ing system off if the engine tem-
perature gauge indicates engine
overheating.
friendly
mode.
recirculated air position. However,
prolonged operation of the recircu-
lated air position will excessively
dry the air. In this case, change the
air position.
temperature control to maintain
maximum comfort.
NOTICE
R-134a