Smart Cruise Control Speed - Genesis G90 2018 Owner's Manual

Smart Cruise Control Speed

To set Smart Cruise Control
speed
1. Push the CRUISE button on the
steering wheel to turn the system
on. The cruise (
cator will illuminate.
2. Accelerate to the desired speed.
The Smart Cruise Control speed
can be set as follows:
• 20 mph (30 km/h)~120 mph (200
km/h): when there is no vehicle
in front
• 5 mph (10 km/h)~120 mph (200
km/h): when there is a vehicle in
front
3. Push the toggle switch down
(SET-), and release it at the
desired speed. The Set Speed
OHI056069 and Vehicle-to-Vehicle Distance
on the LCD display will illuminate.
4. Release the accelerator pedal.
) indi-
The desired speed will automati-
cally be maintained.
If there is a vehicle in front of you, the
speed may decrease to maintain the
distance to the vehicle ahead.
On a steep grade, the vehicle may
slow down or speed up slightly while
going uphill or downhill.
i
Information
Vehicle speed may decrease on an
upward slope and increase on a down-
ward slope.
05
OHI056070
5-83