Jumper Terminal - Genesis G90 2018 Owner's Manual

What to do in an emergency
i
Information
An inappropriately disposed
battery can be harmful to the
environment
health. Dispose the battery
according to your local law(s)
or regulations.
NOTICE
To prevent damage to your vehi-
cle:
• Only use a 12-volt power supply
(battery or jumper system) to
jump start your vehicle.
• Do not attempt to jump start
your vehicle by push-starting.
Jump starting procedure
i
Information
Your vehicle has a battery in the trunk
compartment, but when you jump
start your vehicle, use the jumper ter-
minal in the engine compartment.
1. Position the vehicles close enough
that the jumper cables will reach,
but do not allow the vehicles to
touch.
2. Avoid fans or any moving parts in
the engine compartment at all
times, even when the vehicles are
turned off.
3. Turn off all electrical devices such
as radios, lights, air conditioning,
etc. Put the vehicles in P (Park)
and set the parking brakes. Turn
both vehicles OFF.
4. Open the engine hood.
6-6
and human
5. Open the small service cover with
6. Remove the engine room fuse box
7. Connect the jumper cables in the
8. Connect the other end of the
a screwdriver.
cover.
exact sequence shown in the illus-
tration. First connect one jumper
cable to the red, positive (+)
jumper terminal of your vehicle (1).
jumper cable to the red, positive
(+) battery/jumper terminal of the
assisting vehicle (2).
OHI066005
OHI066006N