Doro 8040 Manual page 58

•
Long press (On normal) to activate by pressing and holding the but-
ton for approximately 3 seconds, or press it twice within 1 second.
Set the volume level for the assistance calls
Select the signal type for the assistance sequence.
Note! This sets the signal of your device, NOT the receiver's signal.
•
High (default).
•
Low.
•
Silent.
Select your assistance contacts
1. Tap Add contact.
2. Select how to add a contact.
3. To delete a contact, press the minus sign after the number.
Note! Some private security companies can accept automatic calls from
their clients. Always contact the security company before using their
phone number. Programming '999' into the assistance button is blocked.
Alert message
•
A text message can be sent to the contacts in the list when the as-
sistance button is pressed. You may edit the SMS to make it more
personal. If required, tap the text field to modify the message.
Switch
Location message
If you send an assistance alert it can be of great help for your help con-
tacts to know your current position. This allows them to be able to assist
you in the fastest possible way. The position SMS lets you share your GPS
coordinates via a text message to your assistance contacts. The position
information is based on the GPS position at the time for the assistance
call, and if that position can't be detected, your latest known position is
shared.
•
Switch
When done, select
to enable or to disable the message.
to enable or to disable.
.
English
52