Aeroplane Mode - Doro 8040 Manual

Note! Bluetooth can use a lot of battery power. Don't forget to turn off
when not using.
Pair with other Bluetooth devices
1. From the Home screen, tap
The Bluetooth connection.
2. Switch
3. Tap to select the unit that you want to connect to.
Note! If you can't spot the unit that you want to connect with, tap
Refresh, to refresh the list. Or you can request to make the device
visible to others, a selection you make on the other unit. Refer to the
other device's user manual.
4. You may be asked to input a password or to press a button. If promp-
ted, input the password or otherwise acknowledge the connection
on your phone or the other device.
5. After you acknowledge the password (or not), the units are con-
nected and communicating. You can begin using the device.
6. Tap to view available options.
Note! Because the devices are now paired, when you turn on Bluetooth
on your device and the other device is on, the connection reestablishes
and they'll stay paired until you unpair them.
Unpair devices
1. From the Home screen, tap
The Bluetooth connection.
2. The paired devices are listed.
3. Tap next to the device name that you want to unpair.
4. Tap Forget.
Note! To disconnect you can turn off the other unit or disable Bluetooth
on that device.

Aeroplane mode

In Aeroplane mode you can't make or receive calls, surf the web or down-
load emails, or do anything that requires an Internet connection, this is
to enable.
English
Set My other connections
Set My other connections
36