Wiring
3.1
Wiring and block diagram
This section includes the block diagram of the DQ 8x24VDC/0.5A BA module with the
terminal assignments for a 1-wire, 2-wire and 3-wire connection.
You can use and combine the different wiring options for all channels.
You can find information on wiring the BaseUnit in the system manual Distributed I/O System
ET 200SP (http://support.automation.siemens.com/WW/view/en/58649293).
Note
The load group of the module must begin with a light-colored BaseUnit. Keep this in mind
also during the configuration.
Note
Cross circuit at output
Be aware that voltage from a cross-circuit at the output can feed L+ to modules.
14
Digital output module DQ 8x24VDC/0.5A BA (6ES7132-6BF01-0AA0)
3
Manual, 09/2017, A5E36107249-AC