Siemens simatic ET 200SP User Manual page 26

Technical specifications
6.1 Technical specifications
Article number
Parallel switching of two outputs
for uprating
•
for redundant control of a load
•
Switching frequency
with resistive load, max.
•
with inductive load, max.
•
on lamp load, max.
•
Total current of the outputs
Current per channel, max.
•
Current per module, max.
•
Total current of the outputs (per module)
horizontal installation
– up to 30 °C, max.
– up to 40 °C, max.
– up to 50 °C, max.
– up to 60 °C, max.
vertical installation
– up to 30 °C, max.
– up to 40 °C, max.
– up to 50 °C, max.
Cable length
shielded, max.
•
unshielded, max.
•
Isochronous mode
Isochronous operation (application synchro-
nized up to terminal)
Interrupts/diagnostics/status information
Diagnostics function
Substitute values connectable
Alarms
Diagnostic alarm
•
Diagnostic messages
Monitoring the supply voltage
•
Wire-break
•
Short-circuit
•
26
6ES7132-6BF01-0AA0
No
Yes
100 Hz
2 Hz
10 Hz
0.5 A
4 A
4 A
4 A
4 A
4 A
4 A; in all other mounting positions
4 A; in all other mounting positions
4 A; in all other mounting positions
1 000 m
600 m
No
Yes
Yes
Yes
Yes
No
No
Digital output module DQ 8x24VDC/0.5A BA (6ES7132-6BF01-0AA0)
Manual, 09/2017, A5E36107249-AC