Thread Cut Options - Pfaff creative icon User Manual

Thread Cut Options

Choose between three Thread Cut Options: Automatic
Thread Cut and Automatic Jump Stitch Trim, Automatic
Thread Cut or Thread Cut – Off.
Off
When selected, no automatic thread cuts will be
performed by the machine. You can touch the Thread
Cut button on the front of the machine to cut the threads
whenever you like.
Note: Select off when using optional accessories that are
attached in the two holes in the needle plate just above the
bobbin cover, to prevent damage to the automatic thread
cutter knife located under the needle plate.
Automatic Thread Cutter
When selected, thread cuts will be automatically
performed in the following situations:
• Upper thread is cut automatically and the presser
foot raises at color changes.
• Bobbin thread and upper thread are cut and the
presser foot raises when an embroidery is finished.
Automatic Thread Cutter and Automatic Jump Stitch Trim
When selected, cuts will be automatically performed
and upper thread pulled to the underside of the fabric.
This function saves you time trimming after the
embroidery is completed. The upper thread will be cut
and pulled to the underside of the fabric when starting
to embroider after a color change, at the first color block,
after stepping through stitches and when the machine
continues to embroider after a jump stitch.
Thread cuts will be automatically performed in the
following situations:
• Upper thread is cut automatically and the presser
foot raises at color changes.
• Bobbin thread and upper thread are cut and the
presser foot raises when an embroidery is finished.
• Upper thread is cut automatically at the start of a
jump stitch.
• Cut commands in designs, stitches or sequences.
Designs marked with this symbol are
programmed for automatic jump stitch
trim. It can also be added to any design
using the complimentary software .
Tip: If the front and back of your embroidery will be visible,
turn off the automatic jump stitch trim and cut the threads
manually.
Tip: If designs are placed close together, e.g. lettering or stitch
sequences, turn off the automatic jump stitch trim and cut the
threads manually.
Tip: If you embroider letters, smaller than 15 mm, turn off the
automatic jump stitch trim and cut the threads manually.
127