Needle Stop Position; Presser Foot Pressure; Options For Feed Dogs; Tie-Off Options - Pfaff creative icon User Manual

Needle Stop Position

When Up is selected your machine stops with the
needle up. When Down is selected your machine stops
with the needle down. This setting can also be made by
touching the Needle Up/Down button on the front of
the machine.
Needle Stop Position

Presser Foot Pressure

In most cases, you do not need to adjust the presser foot
pressure. Specialty techniques may require an
adjustment. The higher the number the more pressure
on the fabric.
Presser Foot Pressure

Options for Feed Dogs

When Auto is selected (recommended) your machine
automatically raises or lowers the Feed Dogs,
depending on the stitch and other selected settings. For
example, the Feed Dogs are lowered when sewing on
buttons or when free-motion sewing.
Select Up and the Feed Dogs will be raised for all
sewing. Select Down and the Feed Dogs will be lowered
1. Feed Dogs Lowered
for all sewing.
2. Feed Dogs Up
Note: The machine will always lower the Feed Dogs
automatically when raising the presser foot to extra lift
position.
Note: The Feed Dogs options will automatically be reset to
auto at the start of a new project from the Help Center.

Tie-Off Options

These options let you program a Tie-Off at the
beginning and at the end of a stitch. It is also possible to
program thread cut at the end of a stitch.
When touching the Tie-Off icon, three options open to
let you select different functions; Tie-Off Beginning, Tie-
Tie-Off Options
Off End and Thread Cut.
Touch Tie-Off to close Tie-Off Options window. Your
settings are shown under Active Features in the
Information Area.
Note: For immediate Tie-Off, use the Tie-Off button, found on
the front of the machine.
88