Related Manuals for Novatel USB730L
Summary of Contents for Novatel USB730L
- Page 1 USB730L – AT002 Global Modem USB730L AT Command Reference Guide Version 1.2 Aug 09, 2017...
- Page 2 Wireless or their respective owners. Nothing contained in this user manual should be construed as granting by implication, estoppel, or otherwise, a license or right of use of Novatel Wireless or any other Trademark displayed in this user manual without the written permission of Novatel Wireless or its respective owners.
- Page 3 TERMS OF USE OF NEW MATERIALS - PLEASE READ CAREFULLY From time to time, Novatel Wireless, in its sole discretion, may make available for download on its website (www.novatelwireless.com), or may transmit via mail or email, updates or upgrades to, or new releases of, the firmware, software, or documentation for its products (collectively, 'New Materials').
-
Page 4: Table Of Contents
AT$NWHWID ............................31 AT$NWICCID .............................. 32 AT$NWLTIME ............................33 AT$NWMCCFILTER ............................ 34 AT$NWMDN.............................. 35 AT$NWMFG .............................. 36 AT$NWMIFIOSSTATUS ..........................37 AT$NWNITZ ............................... 38 AT$NWNN ..............................39 AT$NWPINR .............................. 40 AT$NWPREFMODE ............................ 41 AT$NWPRI ..............................42 AT$NWRAT..............................43 USB730L AT Command Reference Guide... - Page 5 AT+CGMI ..............................70 AT+CGMM ..............................71 AT+CGMR ..............................72 AT+CGPADDR ............................73 AT+CGPIAF ..............................74 AT+CGREG ..............................75 AT+CGSMS ..............................76 AT+CGSN ..............................77 AT+CGTFT ..............................78 AT+CGTFTRDP ............................79 AT+CIMI ..............................80 AT+CIND ..............................81 USB730L AT Command Reference Guide...
- Page 6 AT+CSIM ..............................105 AT+CSMP ..............................106 AT+CSMS ..............................107 AT+CSQ ..............................108 AT+CSS ..............................109 AT+CSTF ..............................110 AT+GCATT ............................... 111 AT+WS46 ..............................112 VZW AT Commands ..................... 113 AT+VZWRSRP ............................114 AT+VZWRSRQ ............................115 USB730L AT Command Reference Guide...
-
Page 7: Introduction
Introduction This document lists and describes the AT Command Set to be used in conjunction with the Novatel Wireless Global Modem USB730L. Platform Reference and Use In this document, the device may be referred to using various terms, such as MS (Mobile Station), TA (Terminal Adapter), DCE (Data Communication Equipment), or ME (Mobile Equipment). - Page 8 AT+GXXX? Returns the current value assigned to the command. Command Write AT+GXXX=<value>,<value>, Sets the command to specified value(s). Command Execution AT+GXXX Executes the specified command. Command AT+CRC=1;S0=1 Executes both the CRC and S0 command. Concatenation USB730L AT Command Reference Guide...
-
Page 9: At Command Format
Where applicable, the <value> responses provided for the READ and EXECUTE formats are modem default values. All efforts will be made by Novatel Wireless. to keep these values current in the documentation but will not be responsible for any differences that may occur as a result subsequent software builds and version enhancements. -
Page 10: Nvtl At Commands
NVTL AT Commands USB730L AT Command Reference Guide... -
Page 11: At$Cnti
GPRS – GPRS network EDGE – Edge network UMTS – UMTS network HSDPA – HSDPA network HSUPA – HSUPA network HSPA+ – HSPA Plus HSPA+DC – HSPA plus DC Notes Examples USB730L AT Command Reference Guide... -
Page 12: At$Nwati
Queries the superset of the ATI command and adds some more info to that AT command. Query Syntax AT$NWATI=? Query Response Manufacturer: Novatel Wireless Incorporated Model: USB730L Revision: 2.03+ SVN 0 [Feb 4 2014 13:56:48] (Engineering Build - FW123_) SVN: 00 +GCAP: +CLTE1, +CIS707-A, +MS, +ES, +DS VID:PID:RID: 0x1410:0xb00d MEID:0x99000062989008... - Page 13 Parameter Values Response: Manufacturer: Model: Revision: SVN: +GCAP: VID:PID:RID: MEID: ESN: HWREV: FID: MSISDN: IMSI: Notes Examples USB730L AT Command Reference Guide...
-
Page 14: At$Nwatr
AT+CSIM to determine the capabilities of the SIM (used by the application layer). Query Syntax AT$NWATR=? Query Response $NWATR: <length>, <atr_string> Write Syntax Write Response Read Syntax AT$NWATR? Read Response $NWATR: 23,3b9f97c00a1fc78031e073fe211b65d0011009228100f2 Execute Syntax Execute Response Unsolicited Response Parameter Values — <length> — <atr_string> Notes Examples USB730L AT Command Reference Guide... -
Page 15: At$Nwband
Unsolicited Response Parameter Values — <band_pref> This is a 32-bit hexadecimal value that has the bits set for each band that needs to be enabled. Refer to the query operation for the meaning of each bit. USB730L AT Command Reference Guide... - Page 16 24 WCDMA III 1700 band 25 WCDMA IV 1700 band 26 WCDMA V US850 band 27 WCDMA VI JAPAN 800 band 28 Reserved for BC12/BC14 29 Reserved for BC12/BC14 30 Reserved 31 Reserved Notes Examples USB730L AT Command Reference Guide...
-
Page 17: At$Nwband2
NV item NV_BAND_PREF_32_63_I. Queries the possible bands <band>. Query Syntax AT$NWBAND2=? Query Response $NWBAND2: <band> bit definitions Write Syntax Write Response Read Syntax AT$NWBAND2? Read Response 20000 Execute Syntax Execute Response Unsolicited Response Parameter Values — <band_pref> USB730L AT Command Reference Guide... - Page 18 Reserved for WLAN 20 Reserved for WLAN 21 Reserved for WLAN Reserved for WLAN Reserved for WLAN Reserved for WLAN Band Class 16 Reserved Reserved Reserved Reserved Reserved Persistent value from NV 31 Reserved Notes Examples USB730L AT Command Reference Guide...
-
Page 19: At$Nwccmautoconnect
AT$NWCCMAUTOCONNECT=? Query Response AT$NWCCMAUTOCONNECT= <auto connect option (0-3)> Write Syntax Write Response Read Syntax Read Response Execute Syntax AT$NWCCMAUTOCONNECT=<auto connect option> Execute Response Unsolicited Response Parameter Values — <auto connect option> 0 - Notes Examples USB730L AT Command Reference Guide... -
Page 20: At$Nwccmconnect
Read Response Execute Syntax AT$NWCCMCONNECT=<0-connect/1- disconnect>,<PDP_IP_type:0-v4 1- v6 2- v4v6> Execute Response Unsolicited Response Parameter Values — 0 - connect <connect/disconnect> 1 - disconnect — <PDP_IP_type> 0 - v4 1 - v6 2 -v4v6 Notes Examples USB730L AT Command Reference Guide... -
Page 21: At$Nwcft
NWCFT: 0,1 Write Syntax AT$NWCFT=<mode> Write Response Read Syntax AT$NWCFT? Read Response NWCFT: 12 Execute Syntax Execute Response Unsolicited Response Parameter Values — <mode> 0 – Novatel COPS Format 1 – 3GPP COPS Format Notes Examples USB730L AT Command Reference Guide... -
Page 22: At$Nwchband
Query Syntax AT$NWCHBAND=? Query Response NWCHBAND: 0, 123 Write Syntax Write Response Read Syntax AT$NWCHBAND? Read Response Execute Syntax Execute Response Unsolicited Response Parameter Values — <Channel> — <Bandclass> Notes Device camps on LTE. Examples USB730L AT Command Reference Guide... -
Page 23: At$Nwcid
Read Response NWCID: 18720,65534 Execute Syntax Execute Response Unsolicited Response Parameter Values — <mode> 0 - ERROR xxxx,yyyy (Cellid, LAC) zzzz (LAC) NOTE: If xxxx, yyyy or zzzz is 0xFFFF, it means invalid value. Notes Examples USB730L AT Command Reference Guide... -
Page 24: At$Nwcslfilter
NWCSLFILTER: 0 (disabled),1 (enabled) Write Syntax AT$NWCSLFILTER= Write Response Read Syntax AT$NWCSLFILTER? Read Response NWCSLFILTER: 3489942284 Execute Syntax Execute Response Unsolicited Response Parameter Values — <value> 0 - filtering disabled 1 - filtering enabled Notes Examples USB730L AT Command Reference Guide... -
Page 25: At$Nwdatausage
Connects to network to start Data Usage query process. Query Syntax AT$NWDATAUSAGE Query Response Write Syntax Write Response Read Syntax AT$NWDATAUSAGE? Read Response <state:0>,<type:Shared>,<limit:100>, <totalusage:0.630>,<lineusage:0.043>, <usagedate:2017-03-12T05:05>,<cycleendday:04/06/2017>,<uint:GB> Execute Syntax AT$NWDATAUSAGE Execute Response Unsolicited Response Parameter Values Notes This is used in Enterprise Mode. Examples USB730L AT Command Reference Guide... -
Page 26: At$Nwdegc
Queries the PMIC temperature (in degrees Celsius only). Query Syntax AT$NWDEGC=? Query Response $NWDEGC: <temp degC> Write Syntax Write Response Read Syntax AT$NWDEGC Read Response $nwdegc: 32 degC Execute Syntax Execute Response Parameter Values — <temp degC> Notes Examples USB730L AT Command Reference Guide... -
Page 27: At$Nwdynamicstatus
Query Syntax Query Response Write Syntax Write Response Read Syntax AT$NWDYNAMICSTATUS? Read Response <network:Verizon Wireless>,<tech:11>,<connstate:3>,<roam:0>, <rssi:5>,<trafic:0>,<femto:0><simstate:3>, <unreadsms:0>,<gpsstate:1>, <duration:0>,<rx:0>,<tx:0>,<localip:192.168.1.1> Execute Syntax Execute Response Unsolicited Response Parameter Values Notes This is used in Enterprise Mode. Examples USB730L AT Command Reference Guide... -
Page 28: At$Nwfid
AT$NWFID Command AT$NWFID Command Function Query Syntax Query Response Write Syntax Write Response Read Syntax AT$NWFID? Read Response $NWFID: No FID $NWFID: SS060115900026 Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 29: At$Nwfotastatus
Execute Syntax Execute Response Unsolicited Response Parameter Values — <FOTA Status> 0 - No Status 1 - Ready to Install 2 - In Progress - Success - Failure Notes This is used in Enterprise Mode. Examples USB730L AT Command Reference Guide... -
Page 30: At$Nwfwapiver
Retrieves the FW API version of a particular release. Query Syntax AT$NWFWAPIVER=? Query Response Write Syntax Write Response Read Syntax AT$NWFWAPIVER? Read Response $NWFWAPIVER: 1.00 Execute Syntax Execute Response Unsolicited Response Parameter Values — <API Version> Notes Examples USB730L AT Command Reference Guide... -
Page 31: At$Nwhwid
Returns the hardware revision ID. Query Syntax AT$NWHWID=? Query Response Write Syntax Write Response Read Syntax AT$NWHWID? Read Response $NWHWID: HW Rev 04 Execute Syntax Execute Response Unsolicited Response Parameter Values — <HWID> Hardware Revision ID Notes Examples USB730L AT Command Reference Guide... -
Page 32: At$Nwiccid
Returns the ICCID of the inserted SIM. Query Syntax AT$NWICCID=? Query Response NWICCID: 89148000000007992523 Write Syntax Write Response Read Syntax AT$NWICCID? Read Response Execute Syntax Execute Response Unsolicited Response Parameter Values — <ICCID> Notes Examples USB730L AT Command Reference Guide... -
Page 33: At$Nwltime
Returns local date and time in the format: “yyyy.mm.dd.hh.mm.ss.d.ltm” Where : yyyy = year mm =month dd = day hh = hour mm = minutes ss = seconds d = Day of the week.[0..6] Monday..Sunday ltm = local time offset Notes Examples USB730L AT Command Reference Guide... -
Page 34: At$Nwmccfilter
Write Response Read Syntax AT$NWMCCFILTER? Read Response $NWMCCFILTER: 0 Execute Syntax Execute Response Unsolicited Response Parameter Values — <mode> 0 = 3GPP MCC Filter 1 = NA MCC Filter 2 = Disable MCC Filter Notes Examples USB730L AT Command Reference Guide... -
Page 35: At$Nwmdn
Retrieves Mobile directory number (MDN) from radio if MDN is provisioned. Query Syntax AT$NWMDN=? Query Response Write Syntax Write Response Read Syntax AT$NWMDN? Read Response 8584721331 Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 36: At$Nwmfg
Provides the device manufacture date. Query Syntax AT$NWMFG=? Query Response $NWMFG: <Month> <Day>, <Year> Write Syntax Write Response Read Syntax AT$NWMFG? Read Response $NWMFG: Jul 10, 2013 Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 37: At$Nwmifiosstatus
Write Response Read Syntax AT$NWMIFIOSSTATUS? Read Response <MiFiOS status: 1> Execute Syntax Execute Response Unsolicited Response Parameter Values — <status> 0 - Not ready 1 - Ready Notes This is used in Enterprise Mode. Examples USB730L AT Command Reference Guide... -
Page 38: At$Nwnitz
Returns the network time, time zone, and daylight savings information (if available). Query Syntax AT$NWNITZ=? Query Response NWNITZ: 16:48:25 02-04-2014 UTZ-8:00 Write Syntax Write Response Read Syntax AT$NWNITZ? Read Response Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 39: At$Nwnn
Displays the Network Name on which the device is camped if it is camped. Query Syntax AT$NWNN=? Query Response Verizon Write Syntax Write Response Read Syntax Read Response Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 40: At$Nwpinr
Command Function Reads the number of attempts left on PIN1. Query Syntax Query Response Write Syntax Write Response Read Syntax AT$NWPINR? Read Response NWPINR: PIN1, 3 Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 41: At$Nwprefmode
This only modifies the NV Item #00010. Power cycle the device to apply the mode change. 4 - AUTOMATIC - CDMA ONLY - HDR ONLY - GSM ONLY - WCDMA ONLY 19 - CDMA AND HDR ONLY 30 - LTE ONLY Notes Examples USB730L AT Command Reference Guide... -
Page 42: At$Nwpri
Query Response $NWPRI: <information>,<version> Write Syntax AT$NWPRI="information", "version" Write Response Read Syntax AT$NWPRI? Read Response $NWPRI: PRI.90026953 REV 103 USB730L VERIZON,103 Execute Syntax Execute Response Unsolicited Response Parameter Values — <information> NW_PRI_INFO_SIZE = 80 is the maximum length allowed — <version>... -
Page 43: At$Nwrat
- GSM only - WCDMA only 3 - LTE only 4 - CDMA (1x) only 5 - HDR only — <domain> preferred domain 0 - Circuit-switched only 1 - Packet-switched only 2 - CS And PS USB730L AT Command Reference Guide... - Page 44 - LTE CS - LTE PS - LTE CS and PS - CDMA CS - CDMA PS - CDMA CS and PS - HDR CS - HDR PS - HDR CS and PS Notes Examples USB730L AT Command Reference Guide...
-
Page 45: At$Nwsfeuimid
AT$NWSFEUIMID Command AT$NWSFEUIMID Command Function Returns the SFEUIMID. Query Syntax AT$NWSFEUIMID=? Query Response Write Syntax Write Response Read Syntax AT$NWSFEUIMID? Read Response $NWSFEUIMID: 0x4c9e4f49a00000 Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 46: At$Nwsimcap
$NWSIMCAP Execute Syntax Execute Response Unsolicited Response Parameter Values — <Value 1> LTE Capable - Response when 4G SIM inserted non-LTE Capable - Response when 3G SIM, non-4G SIM, or no SIM inserted Notes Examples USB730L AT Command Reference Guide... -
Page 47: At$Nwsmsimsformat
Query Response NWSMSIMSFORMAT: (0,1,0xFF) Write Syntax Write Response Read Syntax AT$NWSMSIMSFORMAT? Read Response NWSMSIMSFORMAT: 0 Execute Syntax Execute Response Unsolicited Response Parameter Values — <Mode> 0 - (3GPP) 1 - (3GPP2) 0xFF - (unknown) Notes Examples USB730L AT Command Reference Guide... -
Page 48: At$Nwstaticstatus
MDN, IMEI, and firmware version. Query Syntax Query Response Write Syntax Write Response Read Syntax AT$NWSTATICSTATUS? Read Response <model:USB730L>,<manufacture:Novatel Wireless>, <mdn:8589001304>,<imei:990000927975187>, <fwver:9x25BEN- 2.44.1>,<mifios_ver:1.207>,<config_ver:I14.NVT.USB730.0>,<swver:1.0> Execute Syntax Execute Response Unsolicited Response Parameter Values Notes This is used in Enterprise mode. Examples USB730L AT Command Reference Guide... -
Page 49: At$Nwsvn
Read Response Execute Syntax AT$NWSVN Execute Response $NWSVN: PN = 20420160, Current TAC = 99000094, Current SV = 00 $NWSVN: Table Entry 00 is TAC = 99000094, SV = 00 Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 50: At$Nwthermtemp
$NWTHERMTEMP: Sensor set to 0 [PA_THERM] Read Syntax AT$NWTHERMTEMP? Read Response NWTHERMTEMP: PA_THERM 492028 uV, 47 deg C Execute Syntax Execute Response Unsolicited Response Parameter Values — <therm> 0 - PA_THERM - MSM_THERM - BATT_THERM Notes Examples USB730L AT Command Reference Guide... -
Page 51: At$Nwtimesincebootup
Command Function Displays the time in secs since bootup. Query Syntax AT$NWTIMESINCEBOOTUP=? Query Response Write Syntax Write Response Read Syntax AT$NWTIMESINCEBOOTUP? Read Response NWTIMESINCEBOOTUP: 4112 Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 52: At+Iccid
Command Function Returns the ICCID of the inserted SIM. Query Syntax ATICCID=? Query Response Write Syntax Write Response Read Syntax ATICCID? Read Response NWICCID: 89148000000007992523 Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 53: At+Vzwmruc
Clears the MRU (Most Recently Used) system list from EFS/flash memory. Query Syntax AT+VZWMRUC=? Query Response Write Syntax Write Response Read Syntax Read Response Execute Syntax AT+VZWMRUC Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 54: At+Vzwmrue
7,Undefined mode: 0 8,Undefined mode: 0 9,Undefined mode: 0 10,Undefined mode: 0 11,Undefined mode: 0 12,Undefined mode: 0 Execute Syntax Execute Response Unsolicited Response Parameter Values 0-12 — <entry> CDMA, GSM, HDR, LTE, WCDMA — <rat> 1-4294967295 USB730L AT Command Reference Guide... - Page 55 — <band> 1-4294967295 — <chan> Notes Examples USB730L AT Command Reference Guide...
-
Page 56: At+Vzwrsrp
Write Syntax Write Response Read Syntax AT+VZWRSRP? Read Response VZWRSRP: <physical cell ID> ,<earfcn>, <rsrp> VZWRSRP: 224,5230,"-95.80",224,2325,"-108.20",000,2325,"0.00" Execute Syntax Execute Response Unsolicited Response Parameter Values — <physical cell ID> — <earfcn> — <rsrp> Notes Examples USB730L AT Command Reference Guide... -
Page 57: At+Vzwrsrq
Write Syntax Write Response Read Syntax AT+VZWRSRQ? Read Response VZWRSRQ: <physical cell ID>, <earfcn>, <rsrq> VZWRSRQ: 224,5230,"-12.40",224,2325,"-20.00",000,2325,"0.00" Execute Syntax Execute Response Unsolicited Response Parameter Values — <physical cell ID> — <earfcn> — <rsrq> Notes Examples USB730L AT Command Reference Guide... -
Page 58: 3Gpp At Commands
3GPP AT Commands USB730L AT Command Reference Guide... -
Page 59: At+Cclk
"yy/MM/dd,hh:mm:ss±zz", where characters indicate year (two last digits), month, day, hour, minutes, seconds and time zone (indicates the difference, expressed in quarters of an hour, between the local time and GMT; range -96...+96) Notes Examples USB730L AT Command Reference Guide... -
Page 60: At+Ceer
Checks the proper return for the command support query (test operation) and returns the Extended Error Report. Query Syntax AT+CEER=? Query Response Write Syntax Write Response Read Syntax Read Response Execute Syntax AT+CEER Execute Response +CEER: Regular deactivation Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 61: At+Cemode
Unsolicited Response Parameter Values — <mode> 0 - PS mode 2 of operation 1 - CS/PS mode 1 of operation 2 - CS/PS mode 2 of operation 3 - PS mode 1 of operation Notes Examples USB730L AT Command Reference Guide... -
Page 62: At+Cereg
Unsolicited Response Parameter Values — <n>, <status> 0 - disable network registration unsolicited result code 1 - enable network registration unsolicited result code 2 - enable network registration and local information unsolicited result code Notes Examples USB730L AT Command Reference Guide... -
Page 63: At+Cfun
Integer range support: 0 - do not reset the MT before setting it to <fun> power level, this is default value 1 - reset the MT before setting it to <fun> power level Notes Examples USB730L AT Command Reference Guide... -
Page 64: At+Cgact
+CGACT: (0,1) Write Syntax AT+CGACT=<state>, <cid> Write Response Read Syntax AT+CGACT? Read Response +CGACT: 1,1 +CGACT: 2,0 +CGACT: 3,0 +CGACT: 4,0 Execute Syntax Execute Response Unsolicited Response Parameter Values — <state> — <cid> Notes Examples USB730L AT Command Reference Guide... -
Page 65: At+Cgcmod
+CGCMOD: (1) – when device is in LTE Idle mode (IMS PDN) +CGCMOD: (1,3) – when device has active data call (IMS + INTERNET PDN) Write Syntax AT+CGMOD=<cid>,<cid>, Write Response Read Syntax Read Response Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 66: At+Cgdcont
AT+CGDCONT=<cid>, <pdp type>, <apn>, <pdp addr>, <d_comp>, <h_ comp> Write Response Read Syntax AT+CGDCONT? Read Response +CGDCONT: 1,"IPV6","vzwims","0.0.0.0",0,0 +CGDCONT: 2,"IPV4V6","vzwadmin","0.0.0.0",0,0 +CGDCONT: 3,"IPV4V6","vzwinternet","0.0.0.0",0,0 +CGDCONT: 4,"IPV4V6","vzwapp","0.0.0.0",0,0 Execute Syntax Execute Response Unsolicited Response Parameter Values =<cid>, <pdp type>, <apn>, <pdp addr>, <d_comp>, <h_comp> Notes Examples USB730L AT Command Reference Guide... -
Page 67: At+Cgdscont
+CGDSCONT: (1-24),(2,3, 21,22,23),"IPV6",,,(0-3),(0-4) +CGDSCONT: (1-24),(2,3, 21,22,23),"IPV4V6",,,(0-3),(0-4) Write Syntax AT+CGDSCONT=<cid>, <p_cid>, <d_comp>, <h_comp>, <im_cm_ signalling_flag> Write Response Read Syntax AT+CGDSCONT? Read Response +CGDSCONT: Execute Syntax Execute Response Unsolicited Response Parameter Values =<cid>, <p_cid>, <d_comp>, <h_comp>, <im_cm_signalling_flag> Notes Examples USB730L AT Command Reference Guide... -
Page 68: At+Cgeqosrdp
Command AT+CGEQOSRDP Command Function EPS Quality Of Service Reads Dynamic Parameters. Query Syntax AT+CGEQOSRDP=? Query Response Write Syntax AT+CGEQOSRDP=<cid> Write Response Read Syntax Read Response Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 69: At+Cgerep
Packet Domain Event Reporting - Queries the current mode and buffers the value. Query Syntax AT+CGEREP=? Query Response +CGEREP: (0-2),(0-1) Write Syntax AT+CGEREP=<mode>, <bfr> Write Response Read Syntax AT+CGEREP? Read Response Execute Syntax Execute Response Unsolicited Response Parameter Values — <mode> — <bfr> Notes Examples USB730L AT Command Reference Guide... -
Page 70: At+Cgmi
Checks proper return for command support query (test operation) and requests manufacturer ID. Query Syntax AT+CGMI=? Query Response Write Syntax Write Response Read Syntax Read Response Execute Syntax AT+CGMI Execute Response Novatel Wireless Incorporated Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 71: At+Cgmm
Checks the proper return for command support query (test operation) and requests to identify the specific model of the device. Query Syntax AT+CGMM=? Query Response Write Syntax Write Response Read Syntax Read Response Execute Syntax AT+CGMM Execute Response USB730L Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 72: At+Cgmr
Query Syntax AT+CGMR=? Query Response Write Syntax Write Response Read Syntax Read Response Execute Syntax AT+CGMR Execute Response 2.02+ SVN 0 [Jan 27 2014 17:51:27] (Engineering Build - FW123_) Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 73: At+Cgpaddr
Shows PDP Address for the corresponding CID. Query Syntax AT+CGPADDR=? Query Response +CGPADDR: (1,2,3,4) Write Syntax AT+CGPADDR=<cid> Write Response +CGPADDR: 3,0.0.0.0 Read Syntax Read Response Execute Syntax AT+CGPADDR Execute Response CGPADDR: 3,10.161.97.215,38.0.16.19.176.3.33.32.0.0.0.55.198.65.12.1 Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 74: At+Cgpiaf
Change result code to numeric value. Query Syntax AT+CGPIAF=? Query Response +CGPIAF: (0-1),(0-1),(0-1),(0-1) Write Syntax AT+CGPIAF=[<IPv6_AddressFormat>[,<IPv6_SubnetNotation>[,<IPv6_ LeadingZeros>[,<IPv6_CompressZeros>]]]] Write Response Read Syntax AT+CGPIAF? Read Response +CGPIAF: 0,0,0,0 Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 75: At+Cgreg
Reads and writes GPRS network registration status. Query Syntax AT+CGREG=? Query Response +CGREG: (0-2) Write Syntax AT+CGREG=<n>, <status> Write Response Read Syntax AT+CGREG? Read Response +CGREG: 0,1 Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 76: At+Cgsms
AT+CGSMS? Read Response +CSMS: 1 Execute Syntax Execute Response Unsolicited Response Parameter Values — <service> 0 - packet domain 1 - circuit switched 2 - packet domain prefer 3 - circuit switched prefer Notes Examples USB730L AT Command Reference Guide... -
Page 77: At+Cgsn
ID (IMEI for LTE or ESN number). Query Syntax AT+CGSN=? Query Response Write Syntax Write Response Read Syntax Read Response Execute Syntax AT+CGSN Execute Response 0x809BEC80 Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 78: At+Cgtft
Unsolicited Response Parameter Values <cid>, <packet filter id>, <evaluation precedence index>, <source address and subnet mask>, <protocol number>, <destination port range>, <source port range>, <ipsec security parameter index>, <type of service>, <flow lable>,<direction> Notes Examples USB730L AT Command Reference Guide... -
Page 79: At+Cgtftrdp
Command AT+CGTFTRDP Command Function Traffic Flow Template that reads Dynamic Parameters. Query Syntax AT+CGTFTRDP=? Query Response Write Syntax AT+CGTFTRDP=<cid> Write Response Read Syntax Read Response Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 80: At+Cimi
IMSI value of the SIM inserted in the DUT. Query Syntax AT+CIMI=? Query Response Write Syntax Write Response Read Syntax Read Response Execute Syntax AT+CIMI Execute Response 311480083505147 Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 81: At+Cind
- call in progress - 0 1 roam - roaming indicator - 0 1 smsfull - a short message memory full - 0-1 GPS coverage - GPS coverage - 0 1 callsetup - call setup indicator - 0-3 Notes Examples USB730L AT Command Reference Guide... -
Page 82: At+Clac
Command Function Lists available AT Commands. Query Syntax AT+CLAC=? Query Response Write Syntax Write Response Read Syntax Read Response Execute Syntax AT+CLAC Execute Response <All support AT commands list> Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 83: At+Cmec
0 - only the device can set the status of its indicators 1 - only TE can set the status of the device indicators 2 - device indicators can be set by both the deviceand TE Notes Examples USB730L AT Command Reference Guide... -
Page 84: At+Cmee
Execute Syntax Execute Response Unsolicited Response Parameter Values — <n> 0 - disable +CME Error 1 - enable +CME Error – use numeric value 2 - enable +CME Error – use verbose value Notes Examples USB730L AT Command Reference Guide... -
Page 85: At+Cmer
Reads and writes Mobile Terminated Event Reporting of the supported list, default, and mode change. Query Syntax AT+CMER=? Query Response +CMER: (0-3),(0),(0),(0-1),(0-1) Write Syntax AT+CMER=<mode> Write Response Read Syntax AT+CMER? Read Response +CMER: 0,0,0,0,0 Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 86: At+Cmgd
3 - Delete all read messages from preferred message storage, sent and unsent mobile originated messages leaving unread messages untouched. 4- Delete all messages from preferred message storage including unread messages. Notes Examples USB730L AT Command Reference Guide... -
Page 87: At+Cmgf
Write Syntax AT+CMGF=<mode> Write Response Read Syntax AT+CMGF? Read Response +CMGF: 1 Execute Syntax Execute Response Unsolicited Response Parameter Values — <mode> 0 - PDU mode (default when implemented) 1 - text mode Notes Examples USB730L AT Command Reference Guide... -
Page 88: At+Cmgl
0 - REC UNREAD received unread message 1 - REC READ received read message 2 - STO UNSENT stored unsent message 3 - STO SENT stored sent message 4 - ALL all messages Notes Examples USB730L AT Command Reference Guide... -
Page 89: At+Cmgr
Command Function Reads the Messages Query Syntax AT+CMGR=? Query Response Write Syntax AT+CMGR=<index> Write Response +CMGR: "STO UNSENT","858", this is test Read Syntax Read Response Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 90: At+Cmgs
Write Response Read Syntax Read Response Execute Syntax Execute Response Unsolicited Response Parameter Values — <da> text is entered<ctrl-Z/ESC> TP-Destination-Address Address-Value field in (string format). — <toda> TP-Destination-Address Type-of-Address (octet in integer format). Notes Examples USB730L AT Command Reference Guide... -
Page 91: At+Cmgw
AT+CMGW= if text mode (+CMGF=1): +CMGW[=<oa/da>[,<tooa/toda>[,<stat>]]]<CR> text is entered<ctrl- Z/ESC> if PDU mode (+CMGF=0): +CMGW=<length>[,<stat>]<CR>PDU is given<ctrl-Z/ESC> Write Response +CMGW: 0 Read Syntax Read Response Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 92: At+Cmss
AT+CMSS Command AT+CMSS Command Function Sends message from storage. Query Syntax AT+CMSS=? Query Response Write Syntax AT+CMSS=<index> Write Response Read Syntax Read Response Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 93: At+Cnum
Returns identify subscriber number MSISDN that is assigned to the device. Query Syntax AT+CNUM=? Query Response Write Syntax Write Response Read Syntax Read Response Execute Syntax AT+CNUM Execute Response +CNUM: "Line 1","+18588880718",145 Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 94: At+Copn
Write Syntax Write Response Read Syntax Read Response Execute Syntax AT+COPN Execute Response +COPN: "90111","Inmarsat" +COPN: "90112","MCP Maritime Com" +COPN: "90114","AeroMobile" +COPN: "90115","OnAir" +COPN: "90117","Navitas" +COPN: "90121","Seanet" +COPN: "90126","TIMisea Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 95: At+Cops
- set only <format> (for read command +COPS?), do not attempt registration/deregistration (<oper> and <AcT> fields are ignored); this value is not applicable in read command response - manual/automatic (<oper> field shall be present); if manual selection fails, automatic mode (<mode>=0) is entered USB730L AT Command Reference Guide... - Page 96 1 - GSM Compact 2 - UTRAN - GSM w/EGPRS (see NOTE 1) - UTRAN w/HSDPA (see NOTE 2) - UTRAN w/HSUPA (see NOTE 2) - UTRAN w/HSDPA and HSUPA (see NOTE 2) - E-UTRAN Notes Examples USB730L AT Command Reference Guide...
-
Page 97: At+Cpas
+CPAS: (0,3,4) Write Syntax Write Response Read Syntax Read Response Execute Syntax AT+CPAS Execute Response +CPAS: 0 Unsolicited Response Parameter Values Response: 0 - ready 3 - unavailable 4 - phone in progress Notes Examples USB730L AT Command Reference Guide... -
Page 98: At+Cpin
AT+CPIN Command AT+CPIN Command Function CPIN test mode state. Query Syntax AT+CPIN=? Query Response Write Syntax Write Response Read Syntax AT+CPIN? Read Response +CPIN: READY Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 99: At+Cpms
Reads and sets the Preferred Message Storage. Query Syntax AT+CPMS=? Query Response CPMS: ("SM","SR"),("SM","SR"),("SM","SR") Write Syntax AT+CPMS=<code> Write Response +CPMS: 0,15,0,15,0,15 Read Syntax AT+CPMS? Read Response +CPMS: "SM",0,15,"SM",0,15,"SM",0,15 Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 100: At+Cpwd
(SIM/UICC asks password in MT power up and when this lock command issued) "P2" SIM PIN2 — <oldpwd> (String type) — <newpwd> (String type) maximum length of password can be determined with <pwdlength> Notes USB730L AT Command Reference Guide... - Page 101 Examples USB730L AT Command Reference Guide...
-
Page 102: At+Crsm
Restricts the SIM access, status request via 178 Read Record command. Query Syntax AT+CRSM=? Query Response Write Syntax AT+CRSM=<command>, <fileid>, <P1>, <P2>, <P3>, <data>, <pathid> Write Response +CRSM: 97,21,"62228205422100270283026F40A503" Read Syntax Read Response Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 103: At+Csca
Execute Syntax Execute Response Unsolicited Response Parameter Values — <sca> SC address Address-Value (field in string format). — <tosca> SC address Type-of-Address (octet in integer format) default is 145, otherwise the default is 129. Notes Examples USB730L AT Command Reference Guide... -
Page 104: At+Cscs
AT+CSCS? Read Response "IRA" Execute Syntax Execute Response Unsolicited Response Parameter Values — <character set> IRA - International reference alphabet GSM - 7bit default alphabet UCS2 - 16-bit universal multiple-octet coded character set Notes Examples USB730L AT Command Reference Guide... -
Page 105: At+Csim
Generic SIM Access; directs the control of a SIM inserted in the device. Query Syntax AT+CSIM=? Query Response Write Syntax AT+CSIM=<length>, <command> Write Response +CSIM: 4,"6E00" Read Syntax Read Response Execute Syntax Execute Response Unsolicited Response Parameter Values — <length> — <command> Notes Examples USB730L AT Command Reference Guide... -
Page 106: At+Csmp
Reads and sets Text Mode Parameters. Query Syntax AT+CSMP=? Query Response Write Syntax AT+CSMP=<fo>[,<vp>[,<pid>[,<dcs>]]] Write Response Read Syntax AT+CSMP? Read Response +CSMP: 17,167,0,0 Execute Syntax Execute Response Unsolicited Response Parameter Values — <fo> — <pid> — <dcs> Notes Examples USB730L AT Command Reference Guide... -
Page 107: At+Csms
0 , 1 , 0 , 0 Execute Syntax Execute Response Unsolicited Response Parameter Values — <mode> 0 - packet domain 1 - circuit switched — <Value 2> <MT>, <MO> , <BM>, <CB> Notes Examples USB730L AT Command Reference Guide... -
Page 108: At+Csq
Write Syntax Write Response Read Syntax AT+CSQ? Read Response CSQ: 28,99 Execute Syntax Execute Response Unsolicited Response Parameter Values — <rssi> Signal strength indication (0-31, 99) — <ber> bit error rate (0-7, 99) Notes Examples USB730L AT Command Reference Guide... -
Page 109: At+Css
A - Block A B - Block B, C- Block C, D - Block D, F - Block F, Z - Other block. — <sid> (Integer value) 0-32767 if err, the value is 99999 Notes Examples USB730L AT Command Reference Guide... -
Page 110: At+Cstf
Reads the time format Query Syntax AT+CSTF=? Query Response CSTF: (1,2) Write Syntax AT+CSTF=<format> Write Response Read Syntax AT+CSTF? Read Response +CSTF: 1 Execute Syntax Execute Response Unsolicited Response Parameter Values — <format> 1=HH:MM 2=HH:MM a.m/p.m Notes Examples USB730L AT Command Reference Guide... -
Page 111: At+Gcatt
AT+GCATT=? Query Response +CGATT: (0,1) Write Syntax AT+GCATT=<state> Write Response Read Syntax AT+GCATT? Read Response +CGATT: 1 Execute Syntax Execute Response Unsolicited Response Parameter Values — <state> 0 - detached 1 - attached Notes Examples USB730L AT Command Reference Guide... -
Page 112: At+Ws46
Write Syntax AT+WS46=<network> Write Response Read Syntax AT+WS46? Read Response Execute Syntax Execute Response Unsolicited Response Parameter Values — <network> 12=GERAN only 22=UTRAN only 25=3GPP system (GERAN, UTRAN, E-UTRAN) 28=E-UTRAN only 29=GERAN and UTRAN Notes Examples USB730L AT Command Reference Guide... -
Page 113: Vzw At Commands
VZW AT Commands USB730L AT Command Reference Guide... -
Page 114: At+Vzwrsrp
AT+VZWRSRP Command AT+VZWRSRP Command Function Reads RSRP value. Query Syntax Query Response Write Syntax Write Response Read Syntax AT+VZWRSRP? Read Response VZWRSRP: 224,2325,"-89.80",063,5230,"-102.90",000,5230,"0.00" Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide... -
Page 115: At+Vzwrsrq
AT+VZWRSRQ Command AT+VZWRSRQ Command Function Reads RSRQ value. Query Syntax Query Response Write Syntax Write Response Read Syntax AT+VZWRSRQ? Read Response VZWRSRQ: 224,2325,"-6.40",063,5230,"-14.00",000,5230,"0.00" Execute Syntax Execute Response Unsolicited Response Parameter Values Notes Examples USB730L AT Command Reference Guide...
Need help?
Do you have a question about the USB730L and is the answer not in the manual?
Questions and answers