D-Link DSL-2885A User Manual page 20

Section 4 - Configuration
Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP
does not give you an IP address to use.
Host Name: The host name is optional but may be required by some ISPs. Leave
it blank if you are not sure.
Primary DNS Enter the primary DNS server IP address assigned by your ISP. This
Server: address is usually obtained automatically from your ISP.
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. This
Server: address is usually obtained automatically from your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MAC Address The default MAC address is set to the Internet port's physical interface
Clone: MAC address on the router. You can use the drop-down menu to
replace the Internet port's MAC address with the MAC address of a
connected client.
Click Save when you are done.
D-Link DSL-2885A User Manual
IPv4
Dynamic IP (DCHP)
30