Network - D-Link DSL-2885A User Manual

Wireless ac1200 dual-band gigabit adsl2+/vdsl2 modem router
Hide thumbs Also See for DSL-2885A:
Table of Contents

Advertisement

Section 4 - Configuration
This section will allow you to change the local network settings of the router and to
configure the DHCP settings. In the Settings menu on the bar on the top of the page,
click Network. Click Advanced Settings... to expand the list and see all of the options.
LAN IP Address:
Enter the IP address of the router. The default IP address is
192.168.0.1.
If you change the IP address, once you click Save, you will need
to enter the new IP address in your browser to get back into the
configuration utility.
Subnet Mask:
Enter the subnet mask of the router. The default subnet mask is
255.255.255.0.
Management
The default address to access the router's configuration is
Link:
http://dlinkrouter.local./ Here, you can replace dlinkrouter with
a name of your choice.
Local Domain
Enter the domain name (optional).
Name:
Enable DNS
Disable to transfer the DNS server information from your ISP to your
Relay:
computers. If enabled, your computers will use the router for a DNS
server.
Status:
Enable or disable the DHCP server.
DHCP IP
Enter the starting and ending IP addresses for the DHCP server's IP
Address Range:
assignment.
Note: If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conflict.
D-Link DSL-2885A User Manual

Network

59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents