Table of Contents
Advertisement
oper.fm Page 12 Tuesday, February 19, 2002 1:09 PM
SELECTING VENTILATION DIRECTION
After connecting power supply cord, you must select proper ventilation
direction. If your microwave oven has been installed for room venting, press
number 1. If your oven has been installed for roof or wall venting, press
number 2. This is to be sure that exhaust air is vented correctly.
Example: To set for room ventilation:
Step
Plug in. Press 1 to select room venting.
Press
1
1
2
Press any key except 1 and 2 to
2
fix the room venting direction.
Example: 3
Note: •
If you do not select a ventilation direction, you can not use the oven.
•
When you reset the ventilation direction or after a power interruption, unplug
the oven from the AC outlet and plug it in again and then reset the proper
ventilation direction.
SETTING CLOCK
To set the correct time of day, follow the steps below.
Example: To set 3:15:
Step
Press CLOCK.
1
Press 3, 1 and 5 to enter time of
2
day.
Press CLOCK.
3
The clock begins operation.
Note: •
If the clock (or display) shows any abnormality, unplug the oven from the AC
outlet. Plug it in again and then reset the clock.
•
When your oven is plugged in for the first time or after a power interruption,
reset the clock.
•
This is a 12-hour clock.
•
You can use the oven without setting the clock.
•
The clock display can be turned off. See page 16 (Optional Settings) for more details.
CHILD LOCK-OUT
The oven has a safety feature which prevents use by children. This feature
locks the operation of the oven until canceled.
To set:
Step
Press START and hold for 4 seconds.
1
LOCK appears in the display.
To cancel:
Step
Press START and hold for 4 seconds.
1
LOCK disappears from the display.
Procedure
Vent way
Room Venting
Roof or Wall Venting
Procedure
Procedure
Procedure
12
Keypad
1
3
Keypad
CLOCK
3
5
1
CLOCK
Keypad
START
Keypad
START
Advertisement
Table of Contents
