Audio Adjustments - Pioneer MVH-S301BT Owner's Manual

and turn the M.C. dial to select [SRC OFF :YES], then press to confirm. The unit turns off
automatically and the setting is executed.
6
Turn the M.C. dial to select one of the below.
When [IPHONE] is selected in step 5
• Select [WIRED] for the USB connection.
• Select [BLUETOOTH] for the Bluetooth connection.
When [ANDROID] is selected in step 5
• Select [APP CONTROL] for the USB connection.
• Select [BLUETOOTH] for the Bluetooth connection.
When you select the USB connection, Pioneer ARC APP on the Android
device starts automatically if [ON] is selected in [P.APP AUTO ON] (page 21).
NOTE
If Pioneer ARC APP has not been installed on your Android device yet, a message that
prompts you to install the application will appear on your Android device. Select [OFF]
in [P.APP AUTO ON] to clear the message (page 21).
7
Press SRC/OFF to select any source.
8
Launch Pioneer ARC APP on the mobile device via USB connection.
Press and hold M.C. dial via Bluetooth connection.
NOTE
When you connect a mobile device other than iPhone/Android device, select [OTHERS] in
the [PHONE CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH]
(for the Bluetooth connection). Depending on your mobile device, it may not operate
correctly.
Listening to music on Android
1
Press SRC/OFF to select [ANDROID].
Basic operations
Purpose
Select a track
Operation
Press or .
Purpose
Fast forward or reverse
Pause/resume playback

Audio Adjustments

You can also make various adjustments in the AUDIO settings (page 19).
Adjusting the cut-off frequency value and the
slope value
You can adjust the cut-off frequency value and the slope value of each speaker.
The following speakers can be adjusted.
[FRONT], [REAR], [SUBWOOFER]
NOTE
[SUBWOOFER] can only be selected when [ON] is selected in [SUBWOOFER] (page 19).
1
Press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [AUDIO], then press to confirm.
3
Turn the M.C. dial to select [CROSSOVER], then press to confirm.
4
Turn the M.C. dial to select the speaker unit (filter) to be adjusted, then
press to confirm.
5
Turn the M.C. dial to select [HPF] or [LPF] according to the speaker unit
(filter), then press to confirm.
6
Turn the M.C. dial to select an appropriate cut-off frequency for the
speaker unit (filter) selected in step 4, then press to confirm.
[25HZ] to [250HZ]
7
Turn the M.C. dial to select an appropriate slope for the speaker unit
(filter) selected in step 4.
Operation
Press and hold or .
Press 4/PAUSE.
En
17