Inserting remote control batteries
1 Remove the remote's battery cover.
2 Insert two AAA batteries into the compartment. Make sure that the +
and – symbols on the battery match the symbols in the compartment.
3 Replace the cover.
Using your shelf system
Turning on your shelf system
•
Make sure that the power switch on the back of the unit is turned on,
then press
remote control.
Selecting the sound source
•
Press
the remote control to select FM, LINE IN, BT (Bluetooth), CD, or USB.
The source you select appears on the display.
Adjusting the volume
•
After you select the sound source you want, turn the VOLUME knob
to set the volume to a comfortable level.
•
Press
– to turn the sound back on.
Cautions
STANDBY on the front of your shelf system or on the
SOURCE repeatedly on the front of your shelf system or on
(mute) to mute the sound. Press
www.insigniaproducts.com
All-In-One Shelf System
• Make sure that you insert the batteries correctly.
• Do not use rechargable (Ni-Cd) batteries.
• Do not heat, open, or short-circuit batteries.
• Do not throw batteries into a fire.
• Do not mix different types of batteries or mix old and
new batteries.
• If the remote control does not function correctly or if the
operating range becomes reduced, replace the batteries.
(mute) again, or VOL+ or
9