Philips L01.1U Service Manual page 92

www.freeservicemanuals.info
EN 92 8. L01.1U AC
Parameter 20RF,
21RF,
25RF,
27RF,
29RF,
25",
28",
29"SF, 32V,
33"
EWT
East-West
Trapezium
VSL
Vertical Slope
VAM
Vertical
Amplitude
VSC
Vertical
S-Correction
VSH
Vertical
Shift
VX
Vertical
Zoom
8.3.5 Audio
AF-M
A2T
Figure 8-8 Audio alignment menu
No alignments are necessary for the AUDIO sub menu. Use
the default values.
AF-M (NICAM threshold)
Default value is 300.
To adjust AF-M:
1. To enter SDAM, press the following key sequence on the
remote control transmitter: 0 6 2 5 9 6 directly followed by
the MENU button (do not allow the display to time out
between entries while keying the sequence).
2. Use the MENU UP/DOWN keys to highlight the AUDIO sub
menu.
3. Press the MENU LEFT/RIGHT keys to enter the AUDIO
sub menu.
4. Use the MENU UP/DOWN keys to select AF-M.
5. Use the MENU LEFT/RIGHT keys to adjust the value of
AF-M to 300.
6. Press the MENU button to return to the top level SDAM
menu.
7. To ensure the AF-M setting is saved:
– Turn the television set 'off' by using the 'POWER'
button on the remote control transmitter or the local
keyboard.
– Disconnect the television set from AC power for at
least ten seconds.
– Reconnect the television set to AC power.
Alignments
25V 27V/29"
35 - -
33 25 25
26 32 32
23 23 23
31 28 28
25 - -
S
XX
XX
CL 26532046_008.eps
35V 28WS 32WS 28WSRF 32WSRF
24 28 26
19 42 35
31 30 23
27 24 24
26 18 23
25 25 25
–
A2T (TV A2 Threshold)
Default value is 250.
To adjust A2T:
1. To enter SDAM, press the following key sequence on the
remote control transmitter: 0 6 2 5 9 6 directly followed by
the MENU button (do not allow the display to time out
between entries while keying the sequence).
2. Use the MENU UP/DOWN keys to highlight the AUDIO sub
menu.
040402
3. Press the MENU LEFT/RIGHT keys to enter the AUDIO
sub menu.
4. Use the MENU UP/DOWN keys to select A2T.
5. Use the MENU LEFT/RIGHT keys to adjust the value of
A2T to 250.
6. Press the MENU button to return to the top level SDAM
menu.
7. To ensure the A2T setting is saved:
–
–
–
–
Published in Heiloo Holland
18 27
31 25
23 30
12 20
36 34
25 25
Turn the television set 'on' by using the 'POWER'
button on the remote control transmitter or the local
keyboard.
Turn the television set 'off' by using the 'POWER'
button on the remote control transmitter or the local
keyboard.
Disconnect the television set from AC power for at
least ten seconds.
Reconnect the television set to AC power.
Turn the television set 'on' by using the 'POWER'
button on the remote control transmitter or the local
keyboard
22/11/2016