Introduction; Installation; Connect The Network And Power Source - Polycom SoundPoint IP 600 SIP Quick Reference Manual
Sip 1.5
Hide thumbs
Also See for SoundPoint IP 600 SIP:
- Administrator's manual (134 pages) ,
- User manual (37 pages) ,
- User manual (27 pages)
Table of Contents
Advertisement
User Guide
Introduction
The Polycom SoundPoint IP 600 is a full-duplex, hands-free Session Initiation Protocol (SIP) phone. It provides
telephony features, such as Shared Call Appearance, Call Hold, Call Transfer, and Do Not Disturb.
Installation
The following instructions provide basic installation instructions. Contact your system administrator for additional
information or assistance.
Connect the Network and Power Source
AC Power Option
Connect the supplied network cable between the
LAN jack on the phone and the LAN port on the wall
or hub/switch device port.
Connect the DC plug on the AC wall adapter to the
DC jack marked on the phone.
In-Line Power Option
Plug the supplied network cable between the LAN
jack on the phone and an available Power and Data
port on the in-line power switch if the phone is
connected to a compatible Ethernet switch.
Page of
Advertisement
Table of Contents
Need help?
Do you have a question about the SoundPoint IP 600 SIP and is the answer not in the manual?
Questions and answers