Vertex Standard EVX-5300 Operating Manual page 26

Hide thumbs Also See for EVX-5300:
Table of Contents

Advertisement

s
u
/D
own ( This function is only available in the EVX-5400 )
tatus
p
Press (or press and hold) the assigned PF key to select a 5-tone status code from
the pre-defined status list.
s
c
hEck ( This function is only available in the EVX-5400 )
tatus
Press (or press and hold) the assigned PF key to check the 5-tone receive status
code. When you press this key, the display will indicate the "Message" corre-
sponding to the receive status condition per the pre-defined status list.
D
uty
Press (or press and hold) the assigned PF key to toggle the Duty function of the
2-tone/5-tone decoder "On" and "Off".
When the Duty function is set to "On", the user will always hear (depending on
the sub-audio signaling) all traffic on the paging channel. The radio will sound the
paging alert when it receives the programmed 2-tone/5-tone code.
When the Duty function is set to "Off", the user will NOT hear normal radio traf-
fic on the paging channel. The radio will sound the paging alert and unmute only
when it receives the programmed 2-tone/5-tone code.
iD c
hEck ( This function is only available in the EVX-5400 )
This function allows logged ID of the DTMF Signaling and 5-tone Signaling to be
reviewed and relayed (5-tone Signaling only) to a specific station:
r Press (or press and hold) the assigned PF key to display the logged ID of the
DTMF Signaling and 5-tone Signaling.
r Press the [ P4 ] key to select the category ("DTMF Signaling" or "5-tone Sig-
naling") to be reviewed, then press the [  ] / [  ] keys to select the ID.
r Press the [ P2 ] key to toggle the display between the "ID code display" and "Tag
display".
r Press the [ P1 ] key to send the Call back, when recalling the ID of the "5-tone
Signaling", if desired.
tX s
D
avE
isaBlE
Press (or press and hold) the assigned PF key to disable the Transmit Saver, if you
are operating in a location where high power is almost always needed.
The Transmit Saver reduces the transmit power when a very strong signal from an
apparently nearby station is being received.
24
a
o
dVancEd
EVX-5300/-5400 O
pEratIon
pErating
FCC ID: AXI11144640
IC: 10239A-11144640
M
anual
Vertex Standard LMR, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Evx-5400

Table of Contents