Lone Worker - Vertex Standard EVX-5300 Operating Manual

l w
onE orkEr
Press (or press and hold) the assigned PF key to toggle the Lone Worker feature
"On" and "Off".
The Lone Worker feature is designed to emit an alarm for 30 seconds when the
Lone Worker Timer (programmed by your Vertex Standard dealer) has expired. If
the user does not reset the timer by pressing the PTT switch, the radio switches to
the Emergency mode.
To revive the radio from the Emergency mode, just press (or press and hold) the
PF key which is assigned the Emergency feature or turn off the radio.
g u /D
own ( This function is only available in the EVX-5400 )
roup p
Press (or press and hold) the assigned PF key to select a different group of chan-
nels.
c u /D
hannEl p own
Press (or press and hold) the assigned PF key (generally the [  ] / [  ] key) to se-
lect a different channel within the current group.
s ch u /D
pEED p
Press and hold the assigned PF key causes the radio to begin stepping (repeatedly)
upward or downward through the channels.
pri-1/pri-2
Press (or press and hold) the assigned PF key to recall the pre-programmed prior-
ity channel directly. This is pre-programmed by your Vertex Standard dealer.
pri-2 s
Et
Press (or press and hold) the assigned PF key to toggle the current channel to the
priority channel 2 "enable" and "disable".
pri-2 D
isaBlE
Press (or press and hold) the assigned PF key to disable the priority channel 2 of
the group temporarily.
D ch 1
irEct to
Press (or press and hold) the assigned PF key to recall the pre-programmed chan-
nel directly. This is pre-programmed by your Vertex Standard dealer.
EVX-5300/-5400 O
a
dVancEd
own ( This function is only available in the EVX-5400 )
D ch 4
irEct
M
pErating anual
o
pEratIon
FCC ID: AXI11144640
IC: 10239A-11144640
17
Vertex Standard LMR, Inc.