Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for S-Energy SN245P-10
Summary of Contents for S-Energy SN245P-10
- Page 1 INSTALLATION MANUAL PV Module Installation SN Model Version 1.0 / 2015...
-
Page 2: Before Use
4) For the detailed quality warranty policy of the product, please refer the quality assurance provided by S-Energy Co., Ltd.. 5) When the contents of this manual conflict with the quality assurance, the quality assurance takes precedence. - Page 3 1. Company Introduction S-Energy Co., Ltd., started as the first specialized company of solar module maker in Korea, where solar industry was unexplored. The company has been acknowledged for its technology and quality as it has sold PV module worldwide based on the experience of 20 year’s manufacturing technology and thorough quality management.
-
Page 4: Safety Precautions
3. Safety Precautions These “Safety Precautions” should be thoroughly understood before installing. Danger When connecting with ‘+’, ‘-‘ in module, the cable shall be equipped with direct current, and shall not connect or disconnect with module when electricity flows. If an abnormal or old electrode is connected, you may get injured by sparks arising from direct current. ※... -
Page 5: Environmental Considerations
| Caution | Do not scratch by a sharp tool on the module frame and surface. Environmental considerations Abrasion of the coated surface may lead to oxidize frames or reduce their strength. The scratch of the surface may be the main cause of the module output degradation and decrease in strength. -
Page 6: Caution Before Installation
If it is installed at a different angle or direction, it may adversely 2) Check if there are any scratches on the frame and front surface of the affect an annual generation capacity. In case of horizontal installation, S-Energy glass(The scratch may lead oxidation and reduce the strength) recommends regular cleaning to remove dust on the surface. -
Page 7: Electrical Installation
Diameter: At least larger than minimum 12AWG [4㎟] 7) If the PV module have any electrical problem, you should inspect the [wiring diameter should confirm the local regulation, and S-Energy Co., Ltd. recommends the customer use wires with a diameter larger than the above number at minimum.] module according to the warranty term provided by S-Energy, and return Module configuration[Series wiring]... -
Page 8: Mechanical Installation
7. Mechanical Installation 1) Grade[Class A]: The module is a ‘Class A’ grade. [Class A: This grade is regarded as a device operated above 50V or above 240W and a product where an ordinary person's approach is expected. It acquired the safety standard under IEC 61730-1 and IEC 61730-2] 2) Installation site: The module should be installed at a place satisfying the following Respect. - Page 9 3) Installation hole The method of installing a frame hole passed a mechanical load test item in accordance with the IEC61215 standard, and S-Energy Co., Ltd. recommends the following method of installing a frame hole. As described in figure 1, an installation hole is inserted in the frame, if the frame is randomly processed or the installation hole is changed, the module will be damaged or the strength of frame will be declined.
-
Page 10: Grounding Method
For preventing electric shock and fire, the frame of PV module shall be ■ 60cells grounded properly. [Please be sure to remove a coated portion when grounding, SN245P-10 SN250P-10 SN255P-10 (Irradiance 1000W/m2 ,Module temperature 25℃, AP-1.5) because the PV module aluminum frame is coated with anodizing.]... - Page 11 ① General installation | minor axis installation | ③ Special installation | minor axis installation | The following installation method is recommended by S-Energy for the installation of the PV module on a roof in heavy snow regions ② General installation | major axis installation | -Perform additional fastenings at the bottom of the module’s minor axis frame...
- Page 12 | Remarks 2) Location and method of clamp installation | Module Clamp Assembly | Clamp installation location (A position Confirm "7 mechanical installation” module drawing) - Clamp width : 50mm or wider < 60SERIES> 3) Additional Grounding Methods <72SERIES> | Grounding lug|...
- Page 13 +82-70-4339-7100 Fax. +82-70-4339-7199 E-mail. inquiry@s-energy.com S-ENERGY Japan Co., Ltd. Adresse. 3F-A, DIK Kojimachi Bldg., 1-6-9, Kojimachi, Chiyoda-ku,102-0083, Tokyo, Japan Tel. +81-3-6261-3759 Fax. +81-3-6261-3769 E-mail. toru.yasuda@s-energy.com SENA International (dba S-ENERGY Europe) Address. Ludwig-Erhard-Str. 30-34 65760 Eschborn, Germany Tel. +49-6196-9540-111~3 Fax. +49-6196-9985-778 E-mail.