Answering And Ending A Call Using Your Speaker Or Mobile Phone; Using It With Your Echo Dot - Doss soundbox User Manual

Answering and ending a call using your speaker or mobile
phone
1. When there is an incoming call, the speaker will generate a tone and
call using the speaker.
3. Speak with a clear voice right into the built-in microphone located on
may also end the call directly using the command on your cell phone.
5. When listening to music using your smart phone, playback will resume

Using it with your Echo Dot

You can connect the Dot with the speaker using a 3.5 mm auxin cable or
Bluetooth. Please use the following steps to set up using Bluetooth:
1. Download the Alexa APP, follow the standard setup procedure to
get the dot connected to your home Wi-Fi network.
2. Switch the SoundBox speaker to Bluetooth mode,you can press the
'play/handsfree' button for 5 seconds to keep it in pairing status.
3. Run the Alexa app, tap Menu and then tap Settings.
4. Tap the Echo Dot in your list of Alexa Devices, then tap Bluetooth.
5. The SoundBox speaker should appear in the list of Bluetooth Devices.
If not, press the "play/hands-free" button for 5 seconds and try again.
Once listed, tap on The SoundBox speaker to complete the pairing
process. To remove the device, return to Bluetooth -> tap the name of
the speaker -> then tap "Forget Device".
Note:
1. Voice command will not be able to turn on/off the Soundbox no
matter whether you connect it via Bluetooth / Aux cable. It can
only translate sound signal.
2. To remove the battery saver option, please contact our customer
service at support@dossav.com to remove the function by
upgrading the firmware.