Table of Contents
Advertisement
6.
7. Auxiliary Φ3.5mm jack
devices.
8. TF card: Use it for TF card (with music) playback. support mp3,wav,
to FAT32.
9. Charging port: Plug the supplied USB cable into this port to recharge
10. LED charging indicator.
• Charging : Steady Red.
• Fully charged : Steady Green.
Status indicators
Center indicator/
indicator
6 7 8 9
Long press
Flashing blue
Steady blue
Steady red
Steady Green
Steady red
Steady green
10
to turn the device on and off.
Indicates that the speaker
has entered into the pairing
mode and it is ready to be
paired
Indicates that the device is
successfully paired
Indicates that the device has
switched to the auxiliary
input mode
Indicates that the device has
switched to the TF mode
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the soundbox and is the answer not in the manual?
Questions and answers
I'm a 55 yrs young widower & empty nester. Question; "Am I too old to get Cercomsised"?
How do I link 2 doss speakers
Speaker bleeping
The DOSS SoundBox speaker is beeping every few seconds because its battery is low. It should be recharged for 2-3 hours. The speaker also has a built-in battery saver mode that powers it off if not in use for 15 minutes. This function can be removed with a firmware upgrade.
This answer is automatically generated