Urive Zest User Manual page 51

16. Service information—Diagnosis before requesting a service
State
The clock of the black box
is not correct.
The power is not turned
on.
Screen saver (clock or
speed) is not working.
GPS signal is not received. Check the connection between the black box and the GPS terminal.
Voice information cannot
be heard.
Voice is not recorded.
A file is not saved in
parking mode.
Micro SD card 64 GB
cannot be formatted with
the dedicated viewer.
If a GPS is not installed, you can set the clock in
Settings - System setting - Clock menu.
Check the power on/off switch.
Make sure it is connected to a constant power supply source.
(Black: GND/ Red: B+/ Yellow: ACC power)
In Settings - Display setting,
you can check the state of the screen saver.
Select Settings - Voice setting
in order to check the state of voice information.
Select Settings - Voice setting
in order to check the state of voice recording.
1)If "Parking mode error" message is displayed, check whether the SD space of parking mode is
allocated by 0%.
2)Make sure it is connected to a constant power supply source.
3)Check the SD card using your PC.
1)To format a micro SD card 64 GB in exFAT format with Windows XP, you need to install a patch.
2) File: WindowsXP-KB955704-x86-KOR.exe
3) Download it from Urive's home page - Customer support - Download center - Urive Zest and install it.
4) Close all Windows Explorer windows when formatting it with the dedicated viewer.
Urive Zest ... 51 ... User's Guide
Action