Table of Contents
Advertisement
[ How to upgrade automatically ]
1.#
With the PC Viewer, you can automatically install the upgrade file in the memory card. Insert a micro SD card into a
PC, and then press
information is inserted, a prompt of new firmware is shown as in ①).
2.#
Make sure you select correct drive letter of micro SD card; press the Update button; and format the micro SD card
according to the instruction. (For the format process, refer to "11. PC Viewer - Format SD.")
3.#
When the update is finished, a prompt pops up as in ④ and the update file (MD9300P.bin) is copied to the micro SD card.
4.#
After turn the device off, insert the micro SD card to the body.
5.#
After turn the device on, it is automatically upgrade with voice information(Starting the update) and then it will reboot by
itself.
6.#
In the SD card, some set folders are created after rebooting.
1
2
10. Upgrade -Auto upgrade
button at the upper left of main screen of Viewer. (If a micro SD card having firmware version
3
Urive Zest ... 31 ... User's Guide
4
5
Advertisement
Table of Contents
