Table of Contents
Advertisement
Classification
Situation
Power cable is connected to
Power
the body.
(ACC ON)
Switch is pressed and held.
Parking mode → ACC (Engine) ON
If an impact file has been
produced while parking
Drive mode
When entering the Video list
or Preference menu
Receiving GPS signal
Parking
Parking mode → ACC(Engine)
mode
OFF
Update
When entering high-
Others
temperature cutoff state
When there is no SD card, or there
is a problem with the SD card
08. Functions
BLUE
LED is turned on and then off after booting up,
is turned on.
After booting up, consecutive video files are saved in 35 MB files.
Power On/Off
Mode switching with LCD ON -> Constant recording starts.
When exiting the menu, "Start recording." Recording is restarted
with the voice information
Mode switching with the LCD off, starting to sense motion and
impact, Saves a video from 10 seconds before to 20 seconds
after (30-second duration)
- Monitoring:
BLUE
LED blinking every 1 seconds
Motion sensing: Blinking 4 times per second
- Saving due to a motion: Blinks 6 times per second.
BLUE
LED blinks during update,
and, then, it reboots after the
Rebooting after a voice information
Urive Zest ... 18 ... User's Guide
Action
GREEN
-
-
BLUE
LED is turned off.
-
Voice information
LED
"Start recording."
Power OFF: "Jingling"
"Shifting to the driving mode."
"Impact has been detected
while parking."
"Stop recording"
"GPS is connected"
"Shifting to parking mode."
"Starting the update."
"Video is continuously recorded,
and the LCD will be recovered
after a certain time."
"Please check the SD card."
Advertisement
Table of Contents
