Power Management Features; Advanced Configuration And Power Interface - Intel Model A User Manual

Power Management Features

To conserve power, especially when using the battery, your computer uses the ACPI
power management system. Power management conserves power by controlling in-
dividual components of the computer (the monitor and hard disk drive) or the whole
system.
The Power Options control panel icon in Windows (see page
configure power management features for your computer. You may conserve power
through individual components such as the monitor or hard disk, or you may use ei-
ther Stand by or Hibernate mode to conserve power throughout the system.

Advanced Configuration and Power Interface

The ACPI interface provides the computer with enhanced power saving techniques
and gives the operating system (OS) direct control over the power and thermal states
of devices and processors. For example, it enables the OS to set devices into low-
power states based on user settings and information from applications. ACPI is fully
supported in Windows XP.
E - 3) allows you to
Power Management Features E - 17
OS Note
Power management
functions will vary
slightly depending on
your operating system.
For more information it
is best to refer to the
user's manual of your
operating system.
(Note: All pictures
used on the following
pages are from the
Windows XP OS.)
E