Attaching Other Displays - Intel Model A User Manual

Attaching Other Displays

Besides the built-in LCD, you can also use an external monitor (CRT)/flat panel dis-
play as your display device. Connect it to the external monitor port on the left of the
computer, and configure the displays from SiS VGA Control Center :
1. Attach your external display to the external monitor port and turn it on.
2. Click Start, and click Control Panel (or point to Settings and click Control Panel).
3. Click SiS VGA Control Center (or click Appearance and Personalization > SiS
VGA Control Center).
4. Click Display Setting icon
5. Click Device List <Change Devices>.
6. Select which active device is to be Device 1/Device 2 and click OK.
7. You can then choose the Display Setting mode from the menu buttons.
.
Click OK to close the window if you decide
not to change display devices (do not use
Alt + F4 to close the window).
Figure B - 3
Select Active
Devices
Figure B - 4
Display Setting
Attaching Other Displays B - 5
B