Danfoss ECL Comfort 310 Operating Manual page 72

Operating Guide ECL Comfort 310, application P330
Setting
Input type
Actual (actual flow or power)
Actual limit (limitation value)
Adapt. time (adaptation time)
Filter constant
Units
High limit Y2 (flow / power limitation, high limit, Y-axis)
Low limit Y1 (flow / power limitation, low limit, Y-axis)
Low T out X2 (flow / power limitation, low limit, X-axis)
High T out X1 (flow / power limitation, high limit, X-axis)
Ext. input (external override)
Ext. mode (external override mode)
Upper difference
Lower difference
Delay
Lowest temp.
Max. charge T
Motor pr. (motor protection)
Temp. min. (flow temp. limit, min.)
Temp. max. (flow temp. limit, max.)
Summer, cut-out (limit for heating cut-out)
Infl. - max. (room temp. limitation, max.)
Infl. - min. (room temp. limitation, min.)
Xp (proportional band)
Tn (integration time constant)
M run (running time of the motorized control valve)
Nz (neutral zone)
Min. act. time (min. activation time gear motor)
Tank start diff. (P330.14)
Charge difference
Stop difference
Start difference
Tank stop diff. (P330.14)
Send desired T
Send desired T
72 | © Danfoss | 2017.08
ID Page
1x109 83
1x110 83
1x111 83
1x112 84
1x113 84
1x115 84
1x116 84
1x117 84
1x118 85
1x119 85
1x141 96
1x142 97
1x147 109
1x148 109
1x149 109
1x150 109
1x152 102
1x174 91
1x177 75
1x178 75
1x179 89
1x182 77
1x183 78
1x184 91
1x185 91
1x186 91
1x187 92
1x189 92
1x192 102
1x193 103
1x194 103
1x195 104
1x196 105
1x500 99
1x500 105
Factory settings in circuit(s)
1 2
VI.GU.O3.02