Table of Contents
Advertisement
2
Open the carrier flat. Insert a 4x5 chrome or negative so that
the left edge is against the positioning pins. Position the film
so the image is right-reading and right-side up (emulsion-
side down).
The emulsion side is the dull side.
Note:
Pins
Close the carrier. Squeeze the carrier at the bottom edge and
3
turn the knob to lock it.
The 120 Film Adapters (for 2¼ x 2¼ and 2¼ x 2¾ in. film)
Open the 4x5 carrier as described previously.
1
Locate the appropriate adapter for your image. One is
2
designed for 2¼ x 2¾ in. images, and one is for 2¼ x 2¼ in.
square images.
The frame of film must be cut from the film strip in
Note:
order to be scanned.
3
Orient the adapter so that the words THIS SIDE UP (on the
adapter) face up, and the notches are at the left edge. Place
the unmounted film over the opening, within the raised
ridges of the adapter. Position the film so the image is right-
reading and right-side up.
3
English
11
Advertisement
Table of Contents
