Polaroid ColorShot Printer User Manual page 9

8
3 Connect the power cord to a ground-
ed outlet. When the unit is plugged
in, the LED on the front of the unit
lights to indicate power is on. Note:
The power is now on to the printer.
There is no on/off switch.
4 Connect the USB cable into a USB
connector on the back of the comput-
er, or into another hubbed USB
device. (Polaroid ColorShot has to be
at the end of the device chain.)
5 While watching the computer screen,
connect the USB cable to the back of
the printer.
6 The system detects the printer as
soon as you connect it and prompts
you to install the software. See the
next section, Install the software .