Polaroid ColorShot Printer User Manual page 69

TROUBLESHOOTING (CONT.)
30
•
Some of the edges of the image are
cropped off in the picture, or
•
The print has borders you did not
expect, or
•
The printer creates multiple
partial prints for one image (tiling).
The green power light is blinking.
Imaging application cannot
communicate with the print driver
(Print dialog box or preview screen
does not appear).
The film counter in the preview
window is not accurate.
Resize the image in an image-editing
application. See also
your image on page
check Using Preview on the Graphics
tab to preview what will appear in the
print before it is printed.
This is normal while printing. It should
stop flashing when printing is done.
Check the video accelerator setting;
see the Installation Guide for details.
If problem persists, call Polaroid
Technical Support; see
Loading a partially used pack or opening
the film tray results in an inaccurate
film count. The counter resets when you
load a new film pack.
Tips on resizing
18. Be sure to
page 23.