Polaroid ColorShot Printer User Manual page 68

TROUBLESHOOTING (CONT.)
29
The picture has a blue tint.
Print has a large spot or repeated
spots
Print has an area that did not
develop
Two prints came out one after the
other, and the first one is all gray.
The film may be too cold. Let
the pack warm up to room temperature
before using, if it has been refrigerated
or stored in a cold environment. Film
should be between 55 and 95
o
(13 and 35 C) for best results.
Print rollers are dirty. See
details on cleaning them.
Check your film packaging for details on
how to return defective film.
You loaded a partial pack. The top pic-
ture acts as a film cover to protect the
other frames from exposure, and it is
ejected at the first print command.
o
F
page 25 for