Table of Contents
Advertisement
Connecting
The Speakers
1. Press down the terminal tab on the back of the speaker. (HT-E355 Only)
2. Insert the black wire into the black terminal (-) and the red wire into the red
terminal (+), and then release the tab.(HT-E355 Only)
3. Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks,
Black
Connecting
the wall mount
Connect the speaker cord with the colour
tube to (+), and the speaker cord without the
colour tube to (-).
[_
Celour tube
Front left speaker (L) : White
Front nght speaker (R) : Red
Center speaker : Green
' '
Surround left speaker (L) : Blue
(-) (+) _
"
Surround right speaker (R) : Gray
Prepare screws (not supplied) that are suitable
for the hole on the back of each speaker.
See the illustrations below.
4rnm
-_5mm
10ram
Holeon the backofthe speaker
Fastenthe screws to the wall, then hang the
speaker on the wall,
8tol0mm
_-
In case of HT-E350
Front Speaker (R)
Center Speaker
Front Speaker (L)
Surround Speaker (R)
Surround Speaker (L)
Subwoofer
English
15
Advertisement
Table of Contents
