Download Print this page
Dream On Me 599 Assembly Instructions Manual
Hide thumbs Also See for 599:

Advertisement

Dream On Me Inc.
1532 S Washington Ave
Piscataway Township
NJ 08854
TEL: 732-752-7220
Customer Care: +1 (732) 366-1788
REF.
PART NAME
A
Left Top Panel
Right Top Panel
B
C
Left Side Panel
Centre Panel
D
E
Right Side Panel
F
Left Front Top Rail
G
Right Front Top Rail
Middle Rail
H
J
Front Bottom Rail
K
Left Back Top Rail
Right Back Top Rail
L
M
Back Bottom Rail
Shelf
N
O
Bottom Panel
P
Foot
Q
Door
R
Left Back Panel
S
Right Back Panel
DR1 Drawer Front Panel(Small)
Drawer Front Panel(Big)
DR2 Drawer Side Panel(Small)
Drawer Side Panel(Big)
DR3 Drawer Back Panel(Small)
Drawer Back Panel(Big)
Drawer Bottom Panel
DR4
Drawer Support Rail
DR5
DR3
DR4
QUANTITY
1
Read all instructions before assembling.Save
1
1
instructions for future use.Carefully remove and lay
1
out all parts.Familiarize yourself with all diagrams to
1
facilitate the assembly of your product.Check parts
1
and the enclosed hardware bag with the hardware
1
parts list to be sure all are included and quantities
2
are correct.Destroy cardboard and plastic bags
1
immediately.
1
Attention:In order to properly assemble the chest,
1
follow the assembly instructions carefully.Failure to
1
1
assemble in the manner recommended could make
1
the chest hazardous.
1
Warning:Never use this product if there are any loose
1
or missing fasteners,loose joints,broken parts,or torn
2
mesh/fabric.check before assembly and periodically
1
during use.Contact Dream On Me.for replacement
1
parts and instructional literature if needed.
2
2
4
1
2
3
3
DR1
STYLE NO: 599
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 599 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Dream On Me 599

  • Page 1 Left Back Panel mesh/fabric.check before assembly and periodically Right Back Panel during use.Contact Dream On Me.for replacement DR1 Drawer Front Panel(Small) parts and instructional literature if needed. Drawer Front Panel(Big) DR2 Drawer Side Panel(Small)
  • Page 2 REF. PART NAME QUANTITY 2-3/8” bolt barrel nut cams cam bolts 1-5/8” wood dowel 1-1/2” screw 1-3/8” screw 2” screw shelf pin hinge 1 hinge 2 5/8” screw knob 1” screw allen wrench (for f) allen wrench (for a&h) plastic-strip screw (for back panel) tip over restraint STEP 1...
  • Page 3 Use allen wrench (q) to connect 2" screw (h). Connect the assembled parts of STEP 1 to centre panel (D) by using 1-5/8" wood dowel (e) and 2" screw (h). STEP 3 Use allen wrench (q) to connect bolts. Connect right front top rail (G) and right back top rail (L) to centre panel (D) by using 1-5/8”...
  • Page 4 STEP 4 Use allen wrench (q) to connect bolts. Connect left front top rail (F) and left back top rail (K) to centre panel (D) by using 1-5/8” wood dowel (e),barrel nut (b) and 2-3/8” bolt (a). Connect left side panel (C) to the assembled parts by using 1-5/8”...
  • Page 5 STEP 6 Connect right top panel (B) to centre panel (D) and right side panel (E) by using 1-5/8” wood dowel (e),cams (c) and cam bolts (d). Connect right front top rail (G) and right back top rail (L) to right top panel (B) by using 1-3/8" screw (g).
  • Page 6 STEP 8 Assemble the Drawer. Connect drawer side panel (DR2) to drawer front panel (DR1) by using 1-1/2” screw (f). Connect drawer support rail (DR5) to drawer front panel (DR1) by using cams (c) and cam bolts (d). MAKE SURE the grooves line up and face inside. LOCK cams (c) into drawer support rail (DR5) by turning them.
  • Page 7 STEP 10 Connect drawer back panel (DR3) to drawer side panel (DR2) and drawer support rail (DR5) by using 1-1/2” screw (f). TIGHTEN all by allen wrench (p). ASSEMBLE the rest of drawers by repeating STEP 8,9,10. STEP 11 Connect the knob (n) to drawer front panel (DR1) by using 1” screw (o).
  • Page 8 STEP 12 Slide the drawers into rails on left side panel (C) and centre panel (D). NOTE: PLEASE PUT THE DRAWER WITH CLEAN STICKER AS THE TOP ONE.
  • Page 9 STEP 13 Assemble hinge 1 (j) to right side panel (E) by using 5/8" screw (m). PHILLIPS--HEAD SCREWDRIVER REQUIRED FOR ASSEMBLY ----NOT INCLUDE STEP 14 Assemble hinge 2 (k) to door (Q) by using 5/8" screw (m). Connect the knob (n) to door (Q) by using 1" screw (o). Tighten all by phillips-head screwdriver.
  • Page 10 STEP 15 Connect door (Q) to right side panel (E). PHILLIPS--HEAD SCREWDRIVER REQUIRED FOR ASSEMBLY ----NOT INCLUDE...
  • Page 11 STEP 16 Assemble shelf pin (i) to right side panel (E) and centre panel (D). STEP 17 Connect shelf (N) to the chest.
  • Page 12: How To Lock

    FURNITURE TIPPING DETERRENT HARDWARE HOW TO LOCK Tipping furniture may injure young children. Use of this tipping restraint hardware is highly recommended. When properly instated this hardware could provide protection against the unexpected tipping of furniture due to improper use. WARNING This hardware is only a deterrent.Adult supervision is the only proper deterrent to prevent improper use of any potentially hazardous product.

This manual is also suitable for:

Providence chest combo 2