Adjusting Footplate Height And Calfpad Height/Depth; Adjusting The Footplate Height; Adjusting Calfpad Height; Adjusting Calfpad Depth - Invacare Spree XT Owner's Operator And Maintenance Manual

Adjusting Footplate Height and Calfpad Height/Depth

NOTE: For this procedure, refer to FIGURE 4.9.

Adjusting the Footplate Height

1. Loosen locknut and washer securing the slide tube to the elevating legrest.
2. Reposition footplate to desired height securely tighten locknut and washer.
3. If necessary, repeat STEPS 1‐2 to adjust remaining footplate height.

Adjusting Calfpad Height

1. Loosen the mounting bolt and washer that secure the calfpad bracket to the elevating
legrest assembly.
2. Slide the calfpad bracket up or down until the desired calfpad height is obtained.
3. Tighten the mounting bolt and washer securing the calfpad bracket to the elevating
legrest assembly.
4. If necessary, repeat STEPS 1‐3 to adjust remaining calfpad bracket.

Adjusting Calfpad Depth

1. Remove the mounting screw, spacer and locknut that secure the calfpad to the calfpad
bracket.
2. Insert mounting screw through one of four calfpad bracket mounting holes.
3. Using the mounting screw spacer and locknut, secure the calfpad to the calfpad
bracket.
4. If necessary, repeat STEPS 1‐3 to adjust remaining calfpad assembly.
Calfpad
Locknut
Calfpad Bracket Mounting Holes
FIGURE 4.9 Adjusting Footplate Height and Calfpad Height/Depth
Part No 1118364
Spacer
39
SECTION 4—FRONT RIGGINGS
Calfpad Bracket
Mounting Bolt and Washer
Elevating Legrest Assembly
Mounting Screw
Locknut and Washer
Slide Tube
Footplate
Spree XT