Installation - Siemens SIMATIC NET Operating Instructions Manual

English
3

Installation

Figure 3-1
Wall mounting
Mount the antenna mounting plate at the wall by means of 2 screws.
Use two holes (see position A in the figure above).
Mast mounting
Mount the antenna mounting plate on the mast using two hose clips
(see position B in the figure above).
Position the hose clips that they fit into the recesses in the antenna
mounting plate.
The tightening torque is 3.5 Nm.
24
Options for Mounting the ANT792-6MN
Compact Operating Instructions ANT792-6MN
A5E01116923B-04