English
3
Installation
Mast mounting
Figure 3-1
There are two ways of mounting the antenna on a mast:
•
a) Directly on a mast
Mount the antenna directly at the mast using the two hose clips
(see position A in the figure above).
•
b) Indirectly using the pipe holder with angle bracket
Mount the antenna firstly at the pipe holder with the two hose clips
(see position A).
Afterwards mount the antenna mounting plate onto the mast with
two further hose clips (position B). Position the hose clips that they
fit into the recesses in the antenna mounting plate.
The tightening torque is 3.5 Nm
24
Mast Mounting the ANT792-8DN
A
A
A
Compact operating Instructions ANT792-8DN
B
A5E01116926B-04