Selec-Terrain; Auto Park Brake; Mode Selection Guide - Jeep COMPASS 2018 Quick Reference Manual

Auto Park Brake

The EPB can be programmed to be applied
automatically whenever the vehicle speed is
below 1.9 mph (3 km/h) and the automatic
transmission is placed in PARK, or with a
manual transmission, whenever the ignition
switch is in the OFF position. Auto Park Brake is
enabled and disabled by customer selection
through the Customer Programmable Features
section of the Uconnect Settings.
Any single Auto Park Brake application can be
bypassed by pushing the EPB switch to the
release position while the transmission is
placed in PARK (automatic transmission) and
the ignition is in the ON/RUN position.
For further information, and applicable warn-
ings and cautions, please refer to the Owner's
Manual at www.mopar.com/en-us/care/
owners-manual.html (U.S.
www.owners.mopar.ca (Canadian Residents).

Selec-Terrain

Selec-Terrain combines the capabilities of the
vehicle control systems, along with driver input,
to provide the best performance for all terrains.

Mode Selection Guide

Rotate the Selec-Terrain knob to select the
desired mode.
Residents) or
Selec-Terrain Switch
Selec-Terrain Switch (Trailhawk)
• AUTO: This four-wheel drive operation is a
continuous operation, is fully automatic and
can be used on and off road. This mode
balances traction to ensure maneuverability
and acceleration improvement compared to
a vehicle with two wheel drive. This mode
also reduces fuel consumption, since it al-
lows the disconnect of the drive shaft where
conditions permit.