Connecting To Tv Antenna - Polaroid FLM-2017 User Manual

System Connections

Connecting to TV Antenna

This unit can be connected to the TV signal input source via the TV jack on the rear panel.
After making all connections, turn on the power of the unit and press the SOURCE button to shift to
TV mode.
When channel system is set to Antenna, you can select channels from 2 to 69:
For 2~9 channels:
Press the number buttons to select channel X, wait five seconds to go to the selected channel,
or press ENT button to go to the selected channel directly without waiting.
For 10~69 channels:
Press the number buttons to select channel XX, the unit will go to the selected channel directly.
When channel system is set to Cable, HRC or IRC, you can select channels from 1 to
125
1. For 0~9 and10~99 channels :
Press the number buttons to select the channel X or XX, wait five seconds to go to the selected
channel, or press ENT button to go to the selected channel directly without waiting.
2. For 100~125 channels:
Press the number buttons to select channels XXX, the unit will go to the selected channel
- 15 -