Helmet Holder - Yamaha Star XV1900AE 2013 Owner's Manual

1. Projection
2. Seat holder
2. Push the front of the seat down to
lock it in place.
3. Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.
INSTRUMENT AND CONTROL FUNCTIONS

Helmet holder

1
2
1. Helmet holder
2. Helmet holding cable
The helmet holder is located under the
rider seat. A helmet holding cable is
provided beside the owner's tool kit to
secure a helmet to the helmet holder.
To secure a helmet to the helmet
holder
1. Remove the rider seat. (See page
4-15.)
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loop over the helmet holder.
4-16
EAU38343
1. Helmet holding cable
2. Helmet
3. Place the helmet on the left side of
the vehicle, and then install the
rider seat. WARNING! Never ride
with a helmet attached to the
helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an acci-
NOTICE: Be sure to
dent.
[EWA10162]
place the helmet on the left side
of the vehicle. Some helmets
may contact the muffler when
placed on the right side be-
cause of their size or shape.
[ECA15332]
4