Page 2
any Hollandia Power Inverter with Charger. Battery down to or below 10V while machine switched off, then battery is damaged. There is not enough free space around Keep free space around the battery the battery Check if fan is working normally select Check position of the red power button Wire connection inside machine is...
Load 80% Load 75% The series inverter can also Battery capacity comeltion...
Page 5
10.5V extra work reactivating Pure sine wave output Pure sine wave output Inbuilt MPPT solar charge controller 30A~60A Configure inbuilt PWM solar charge controller 50A Battery priority function AC/Battery priority Via function switch 12V/24V/48V input optional Auto generator start(AGS) Max. AC charge current 70A.(Optional) Max.
Setting Sine 120VAC 75-140VAC 95-140VAC 230VAC 145-272VAC 185-272VAC Switch ON/OFF INVERTER Inverter mode PV voltage normal Fault FAULT 185-272 Battery voltage normal 95-140 Charge Current Adjuster:25%,50%,75%,100%. Charge Current Adjuster Charging (Optional) 145-272 75-140 AC Charge CHARGE 10. Battery Type Selector 11.
Line Mode ON(Power Saver) When utility is the unit the battery from the utility,LCD indicate charge current: INVERTER OFF In utility mode the unit provide output power from the utility, the indication and displays are following figures: Battery Voltage 12VDC 24VDC In battery mode the unit will provide output power from battery or PV, LCD indicate battery capacity...
LCD Display Icons UPS input / output parameters Information 1.Indicate input voltage, input frequency, battery voltage and charger current 2.Indicate output voltage, output frequency, load in VA, load in W. UPS Work Status Information UPS work status display, output and bypass mains electricity charge, the inverter output of the inverter power saving mode status display.
Need help?
Do you have a question about the PV3000 PK and is the answer not in the manual?
Questions and answers