Table of Contents
Advertisement
Appendix D
Access Codes / Passcode
The Model RPM10 and RPM20 Room Monitors may prompt you to enter an access code to
change the room mode or to enter the menu system. The access code screen is shown below in
Figure 35. To enter the access code, type in the 4-digit passcode shown below and press Save.
The PresSura room monitors and controllers feature two levels of passcode access:
To change the room mode, use the passcode 0317.
To access the menu system, use the passcode 2887.
Figure 35. Access Code Screen
107
Advertisement
Table of Contents
Troubleshooting
