AEA CIA-HF Operating Manual page 23

B02K ; Command to Analyzer: report frequency Z, R, X, and Angle
B= ; Response from Analyzer:
501,501,0,-0K ; Response: Z = 50.1, R = 50.1, X = 0, Angle = -0°
B05K ; Command to Analyzer: report frequency low, high for 2:1 bandwidth
B= ; Response from Analyzer:
6550,20,9650
K ; Response: frequency (low) = 6.55 MHz, BW = 2:1, frequency (high) = 9.65 MHz
B06K ; Command to Analyzer: report frequency low, high for USER #1 bandwidth
B= ; Response from Analyzer:
7300,15,8900
K ; Response: frequency (low) = 7.3 MHz, BW = 1.5:1, frequency (high) = 8.9 MHz
U18K ; Command to Analyzer: set the USER #1 Bandwidth to 1.8
U18K ; Response from Analyzer: USER #1 Bandwidth set to 1.8
B06K ; Command to Analyzer: report frequency low, high for USER #1 bandwidth
B= ; Response from Analyzer:
6850,18,9350
; Response: frequency (low) = 6.85 MHz, BW = 1.8:1, frequency (high) = 9.35 MHz
K
; Command to Analyzer: report minimum SWR and frequency at the minimum
B08K SWR
B= ; Response from Analyzer:
105,8100K ; Response: minimum SWR detected = 1.05, at 8.1 MHz
B10K ; Command to Analyzer: report lower, center, and upper frequency
B= ; Response from Analyzer:
; Response: frequency (low) = 3.0 MHz, center frequency = 8.0 MHz, frequency
3000,8000, (high) =
13000K 13.0 MHz
SK ; Command to Analyzer: send the SWR data points
S= ; Response from Analyzer:
1278, ; Response: data point #1 ( @ 3.0 MHz) SWR = 12.78
1204, ; Response: data point #2 ( @ 3.1 MHz) SWR = 12.04
1130, ; Response: data point #3 ( @ 3.2 MHz) SWR = 11.30
1072, ; Response: data point #4 ( @ 3.3 MHz) SWR = 10.72
... ;
... ; Response: data points #5 - #95...
... ; (not shown here, for clarity)
20