Nomenclature; Dimensions - Controllers; Accessories; Usb-Serial Conversion Cable/Terminal Covers - Omron E5CC Manual

Nomenclature

E5CC
Operation
indicators
Level key
Mode key
Dimensions
Controllers
E5CC
48 × 48
The Setup Tool port is on the top of the Temperature Controller.
It is used to connect the Temperature Controller to the computer
to use the Setup Tool.
The E58-CIFQ2 USB-Serial Conversion Cable is required to
make the connection.
Refer to the instructions that are provided with the USB-Serial
Conversion Cable for the connection procedure.
Note: Do not leave the USB-Serial Conversion Cable
Accessories (Order Separately)
● USB-Serial Conversion Cable
E58-CIFQ2
● Terminal Covers
E53-COV17
48.8
9.1
Temperature unit
No.1 display
No. 2 display
Up key
Shift (PF) key Down key
73.1
4
60
1
Waterproof Packing Mounting Adapter
(Accessory) (Accessory)
connected when you use the Temperature Controller.
250
USB connector (type A plug)
48
22
Setup Tool port
on top panel
Mounted Separately
44.8 × 44.8
48.8 58
60 min.
45
Terminal Cover
(E53-COV17)
(Sold separately)
• Recommended panel thickness is 1 to 5 mm.
• Group mounting is not possible in the vertical direction. (Maintain
the specified mounting space between Controllers.)
• To mount the Controller so that it is waterproof, insert the
waterproof packing onto the Controller.
• When two or more Controllers are mounted, make sure that the
surrounding temperature does not exceed the allowable operating
temperature specified in the specifications.
• To attach the USB-Serial Conversion Cable to the control panel,
use a panel thickness of 1 to 2.5 mm.
(2,109.1)
(87)
LED (RD)
LED (PWR)
LED (SD)
● Terminal Covers
E53-COV23 (Three Covers provided.)
44.8
Top View
Panel Cutout
Group Mounted
(48 × number of units - 2.5)
Group mounting does
not allow waterproofing.
+0.6
45
0
+0.6
0
(13)
1,740
(250)
2 3.8
10
Terminal Cover
(E53-COV23)
E5CC
(Unit: mm)
+1.0
0
+0.6
45
0
(5) (15)
Serial connector
11