Zanussi ZRA25100WA User Manual page 22

1. Remove both adjustable feet, and remove
the bottom hinge bracket and left foot bracket
by unscrewing the bolts.
2. Unscrew and remove the bottom hinge pin,
and replace in another hole.
3. Interchange two brackets and fit them.
Replace both adjustable feet.
4. Unscrew and remove the top hinge pin, turn
the top hinge over and replace the pin.
22
EN
ZRA25100WA_1602.indb 22
5. Transfer the door to the proper position.
Ensure the door is level; insert the bottom
hinge pin into the lower hole of the door and
the top hinge pin into upper hole of the door.
Then tighten the top hinge with three flange
screws.
6. Move the front small plate from left to right.
7. Replace the top cover.
Before replacing the door, please alter the
position of the handle and hinge hole cover.
1. Use a flat bladed screwdriver to remove the
2 screw covers at the side of the handle.
Then unscrew the handle and fit it to the
other side of the door.
2. Move the hinge hole cover to the other side.
2016-02-25 08:24:06