Polaroid PDM-2727M User Manual page 37

PROBLEM
There is no picture.
Poor AV performance.
The remote control
does not work
Other possibilities:
Static or other external interference may cause the player function abnormally. In order to
recover normal status, unplug the power-supply cord and then plug it into the outlet again to
reset the player. If the problems still exist, cut off the power supply and consult your service
center or the qualified technician.
Troubleshooting
POSSIBLE CAUSE
The LCD may be off or not Turn on the LCD and choose
be in correct video mode.
the correct video mode.
The system connection may
Connect
be not correct.
correctly.
Switch AV tab on the bottom
The unit may be not in AV
out mode. of the unit to out.
The disc may be dirty or
Clean or change the disc.
warped.
There may be some
Remove
obstructions between the
between the remote control
remote control and the
and the player.
player.
The remote control may not Point the remote control at
be pointed at the player. the player directly.
The batteries of remote Make sure the polarity of
each battery is correct.
control may not be inserted
correctly.
Replace the batteries.
The batteries of remote
control may be out of power
or weak.
36
POSSIBLE SOLUTION
the system
the obstruction