Power Supply Preparation
Using the AC Adapter
The player is supplied with an AC adapter for powering the unit and charging the battery.
1.
Connect AC adapter to the right side
of the DVD player in the jack marked
DC 9.5V IN, as shown on the right.
2.
Plug the other end of the power cord
into the wall AC outlet.
NOTE: Turn player's power off before unplugging.
Using of Car Adapter
The player is supplied with a Car Adapter for powering the unit while in a vehicle.
Connect the Car Adapter Power Plug to
the unit's power jack and plug the other
end to the vehicle's cigarette socket, as
shown right.
Attention
Do not operate the unit or view video software while driving a vehicle.
Place the unit in a proper position for viewing.
Disconnect the player from the Car Adapter when starting the vehicle.
17